new dart modification

i modified my dart to travel, 15feet longer, how;

get a normal or stefan dart.
at the base of the dart, cut it straight at 1.5-1.75 inches
then cut a x in the dart and spread the quarters.
this will make then ends of the dart wider and allow more air to flow through the dart

lazzari wrote:i modified my dart to travel, 15feet longer, how;

get a normal or stefan dart.
at the base of the dart, cut it straight at 1.5-1.75 inches
then cut a x in the dart and spread the quarters.
this will make then ends of the dart wider and allow more air to flow through the dart

Grab a standard dart, or a stefan.
Starting at the base of the dart, cut it in half, 1.5 to 1.75 inches deep (assuming your darts are long enough to accomodate this)
Then, cut perpendicular to your first cut, forming an "X" in the body, of the dart, and slightly spread the resulting quarters of the dart.

Fixed that for you. That was painful to read. Work on your grammar.

Oh man he's been told countless times about his grammar and it makes me rage that he doesn't do anything about it. This should have some pictures in it. As I read I got bored of it straight away. No Pictures = Write-Up fail.

I think, tell me if i am wrong, that if you have a snug barrel for your dart then after a couple of shots the widened end would just compress back. So then you end up with a dart with cuts in it and would waste a lot of time to widen them again.

lazzari wrote:i modified my dart to travel, 15feet longer, how;

get a normal or stefan dart.
at the base of the dart, cut it straight at 1.5-1.75 inches
then cut a x in the dart and spread the quarters.
this will make then ends of the dart wider and allow more air to flow through the dart

You know, i can read this clearly and easily. I cant pick the grammar errors at all, without re reading it over and over again. This must be where age and experience pays off, too used to reading through typos from years of internet use (i have been using the internet for chat and forums for around 15 years now).

lazzari wrote:i modified my dart to travel, 15feet longer, how;

get a normal or stefan dart.
at the base of the dart, cut it straight at 1.5-1.75 inches
then cut a x in the dart and spread the quarters.
this will make then ends of the dart wider and allow more air to flow through the dart

I was in the same boat as you when I first started always getting flamed and told to fix my grammer countless times but you gain more experiance in the nerf world people will come to respect you but just keep in mind (dont listen to forum lurkers or people that just want to start drama on here hence they dont know what nerf is about and or going to nerf wars).Just remember to show some pictures of your topic's that you make than people can understand what you have made or created.

Good luck mate....

radiantraidercs-35 wrote:

lazzari wrote:i modified my dart to travel, 15feet longer, how;

get a normal or stefan dart.
at the base of the dart, cut it straight at 1.5-1.75 inches
then cut a x in the dart and spread the quarters.
this will make then ends of the dart wider and allow more air to flow through the dart

I was in the same boat as you when I first started always getting flamed and told to fix my grammer countless times but you gain more experiance in the nerf world people will come to respect you but just keep in mind (dont listen to forum lurkers or people that just want to start drama on here hence they dont know what nerf is about and or going to nerf wars).Just remember to show some pictures of your topic's that you make than people can understand what you have made or created.

Good luck mate....

There's a reason you kept getting flamed. You see, there's these certain characters on your keyboard. There is the comma "," the full stop, also known as a period ".", and this rule in grammar and syntax known as capitalization. You should really investigate their meaning, and usage scenarios, so that what you type doesn't sound read like a load of rambling gibberish. Then, and only then, will people stop flaming you, and actually taking an interest in what you have to say.

Good luck.

sitras wrote:I think, tell me if i am wrong, that if you have a snug barrel for your dart then after a couple of shots the widened end would just compress back. So then you end up with a dart with cuts in it and would waste a lot of time to widen them again.

you use a marbal, to prim it open then the foams memory will be altered and it will stay that way.

for everyone else: get into the seasons spirit, dont bask on the little things