Oz Nerf - Australian Nerf Community

Would you like to react to this message? Create an account in a few clicks or log in to continue.
Oz Nerf - Australian Nerf Community

Nerfing down under!. Oz Nerf - Australian Nerf Community

If you're new to the forums please do the following.
1. Read the Forum Rules before posting!
2. Update your location, age and avatar TRUTHFULLY
3. Introduce yourself in the Welcome to Oznerf forum section =)

Navigation

Statistics

Our users have posted a total of 52416 messages in 3425 subjects

We have 1922 registered users

The newest registered user is RTItemplar

Latest topics

» gold coast nerf war?
by ShaGGz LMS Fri Oct 07, 2016 3:49 pm

» nerf clearout
by Runeblade Wed Sep 07, 2016 7:03 am

» How to replace the Longshot trigger plate?
by neon64bit Mon Jan 04, 2016 9:42 am

» Mid North Coast/Hunter War Organisation
by Vampros Thu Dec 31, 2015 6:18 pm

» WTB felt for slugs
by Richo123 Sat Oct 24, 2015 6:21 am

January 2022

MonTueWedThuFriSatSun
     12
3456789
10111213141516
17181920212223
24252627282930
31      

Calendar Calendar


+73
shaun12343
Sairex
KingCam
clem0x
GLMC
joshredder
ZeusPwns
Echoes
dazzini
stoph
Sicnut
Nooft1187
cfb_rolley
Servulus
WH1PLA5H
dchil15
JayDesu
Baconheart
camo1010
TylerMaxwell
Johnnus
ShadowSniper
Del0052
Acerised
IamWaylander
Napolean
mull
Philb2323
frostythesnowman
NORTHENGHOST
h3rrr0
Smeghead
likes2mod11
oznerfnerd
Eclipse
Reaper
natious
Kaine
Dietzie
Luke
|Shadow|
_D_
Zandor
lech
Rooksy
mister_elliott
Photo Ninja
JacobYeah
False
littlebro05
-mirsho
Joey
Sir_Spacemonkey
mavshot
inPhamous
Calico
pleagh
LostBoy
Swatsonia
evozn
sniperdude49
Jeo
ApoKalyptiK x
SuctionCup
Unknown
Brunius
clunk07
Sheepie_125
revo
Ungmon
AbyssHD
abowden
Bacara
77 posters

    The Questions Thread.

    evozn
    evozn


    Posts : 396
    Join date : 2011-03-31
    Age : 25
    Location : Melbourne, Point Cook

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  evozn Sat Mar 24, 2012 9:24 am

    It's normal, your plunger will give way soon tho. Just reinforce it.
    Jeo
    Jeo


    Posts : 462
    Join date : 2011-01-27
    Age : 34
    Location : Canberra

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Jeo Sat Mar 24, 2012 10:44 am

    Not always, but it will break quicker than it would have otherwise.
    TylerMaxwell
    TylerMaxwell


    Posts : 211
    Join date : 2012-01-19
    Age : 25
    Location : Bundaberg Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  TylerMaxwell Sat Mar 24, 2012 11:12 am

    Does OMW sell the strongest Longstrike spring available? I want something stronger but 6 KG seems to be the highest I can find, would a LS Spring work? moreso the 14 KG spring? if I'm using Polycarbonate parts then I'm sure it can take the power.
    camo1010
    camo1010


    Posts : 443
    Join date : 2011-08-09
    Age : 34
    Location : Toowoomba QLD, Australia, Earth, Milky way....

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  camo1010 Sat Mar 24, 2012 11:13 am

    Yea you can never have to much re-inforcing
    evozn
    evozn


    Posts : 396
    Join date : 2011-03-31
    Age : 25
    Location : Melbourne, Point Cook

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  evozn Sat Mar 24, 2012 11:36 am

    [quote="TylerMaxwell"]Does OMW sell the strongest Longstrike spring available? I want something stronger but 6 KG seems to be the highest I can find, would a LS Spring work? moreso the 14 KG spring? if I'm using Polycarbonate parts then I'm sure it can take the power. [/quote]
    - The strongest spring would be 6 kg spring, having an even stronger one would be near pointless with that volume of air.
    - Longshots spring are not compatible with the longstrike.
    - Even with the 6kg spring the kits can still break, I've heard about the boltsleds morphing just using the 6 kg spring.
    TylerMaxwell
    TylerMaxwell


    Posts : 211
    Join date : 2012-01-19
    Age : 25
    Location : Bundaberg Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  TylerMaxwell Sat Mar 24, 2012 11:38 am

    evozn wrote:
    TylerMaxwell wrote:Does OMW sell the strongest Longstrike spring available? I want something stronger but 6 KG seems to be the highest I can find, would a LS Spring work? moreso the 14 KG spring? if I'm using Polycarbonate parts then I'm sure it can take the power.

    - The strongest spring would be 6 kg spring, having an even stronger one would be near pointless with that volume of air.
    - Longshots spring are not compatible with the longstrike.
    - Even with the 6kg spring the kits can still break, I've heard about the boltsleds morphing just using the 6 kg spring.


    Quote fail. But thank you for the information. I hope the 6 KG suffices. I'm hearing 60-70 ft ranges which is good.
    Jeo
    Jeo


    Posts : 462
    Join date : 2011-01-27
    Age : 34
    Location : Canberra

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Jeo Sat Mar 24, 2012 3:18 pm

    6kg spring will warp your longstrike bolt sled.
    At the end of the day it will always be a reverse plunger based blaster. Practically anything you can do to a Recon, you can do to a LongStrike. The internals are basically the same.

    Also talk to OzNerfNerd on here.
    TylerMaxwell
    TylerMaxwell


    Posts : 211
    Join date : 2012-01-19
    Age : 25
    Location : Bundaberg Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  TylerMaxwell Sat Mar 24, 2012 3:29 pm

    Jeo wrote:6kg spring will warp your longstrike bolt sled.
    At the end of the day it will always be a reverse plunger based blaster. Practically anything you can do to a Recon, you can do to a LongStrike. The internals are basically the same.

    Also talk to OzNerfNerd on here.

    I hope you know I'm using OMW, granted it may still warp but that stuff is ridiculously strong.
    Jeo
    Jeo


    Posts : 462
    Join date : 2011-01-27
    Age : 34
    Location : Canberra

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Jeo Sun Mar 25, 2012 6:56 am

    TylerMaxwell wrote:I hope you know I'm using OMW, granted it may still warp but that stuff is ridiculously strong.

    Yep.
    likes2mod11
    likes2mod11


    Posts : 25
    Join date : 2011-07-23
    Age : 23
    Location : Thirlmere NSW

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  likes2mod11 Sun Mar 25, 2012 8:27 am

    What glue would you recommend for gluing together an inline clip.
    TylerMaxwell
    TylerMaxwell


    Posts : 211
    Join date : 2012-01-19
    Age : 25
    Location : Bundaberg Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  TylerMaxwell Sun Mar 25, 2012 8:30 am

    likes2mod11 wrote:What glue would you recommend for gluing together an inline clip.


    I'm going to take a wild guess and say an adhesive /Epoxy Putty, and descent brand will do.
    likes2mod11
    likes2mod11


    Posts : 25
    Join date : 2011-07-23
    Age : 23
    Location : Thirlmere NSW

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  likes2mod11 Sun Mar 25, 2012 8:51 am

    TylerMaxwell wrote:
    likes2mod11 wrote:What glue would you recommend for gluing together an inline clip.


    I'm going to take a wild guess and say an adhesive /Epoxy Putty, and descent brand will do.

    Thanks I think I will use some epoxy putty with some glue I have
    Eclipse
    Eclipse


    Posts : 339
    Join date : 2010-09-27
    Age : 23
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Eclipse Sun Mar 25, 2012 8:59 am

    Noooo! Epoxy putty is for gap filling and doesn't have adhesive properties. Use some sort of epoxy GLUE, like Selly's 3 day. Don't settle for the lower strength stuff- it'll just break. Just out of curiosity, what are you putting to inline on?
    lech
    lech


    Posts : 106
    Join date : 2011-11-15
    Age : 32
    Location : Preston, Victoria, Australia

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  lech Sun Mar 25, 2012 9:53 am

    likes2mod11 wrote:What glue would you recommend for gluing together an inline clip.

    PVC Cement
    Eclipse
    Eclipse


    Posts : 339
    Join date : 2010-09-27
    Age : 23
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Eclipse Sun Mar 25, 2012 9:56 am

    lech wrote:
    likes2mod11 wrote:What glue would you recommend for gluing together an inline clip.

    PVC Cement

    Or that. It's just that some people don't have access to it, and also that it requires a primer and is toxic and hard to clean up. Unless your assembling pressure parts, I really wouldn't bother.
    clunk07
    clunk07
    Administrator
    Administrator


    Posts : 2953
    Join date : 2011-02-02
    Age : 41
    Location : Blackwater, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  clunk07 Sun Mar 25, 2012 9:59 am

    You can buy Bostik Blue pvc cement for about $6.50 for a small bottle from Mitre 10.
    It works fine without using a primer, just make sure that both surfaces are clean. Yes, the fumes are a bit hazardous, but use it in a well-ventilated area, and you'll be fine. It also has the added benefit of being able to heat the adhesive and pull the join apart if you've made a mistake/want to change the design.

    Cheers,


    ____________________________________________________________________________________________________________________________________________________________
    The Questions Thread. - Page 8 Cwc_lo10

    Clunk Weapons Co. Blaster-smith Services:
    Commissions offered on Stampede, LongShot, Spectre, LED Maverick.

    CWC Blaster-smith Services
    CWC Custom Paint
    lech
    lech


    Posts : 106
    Join date : 2011-11-15
    Age : 32
    Location : Preston, Victoria, Australia

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  lech Sun Mar 25, 2012 10:10 am

    clunk07 wrote:You can buy Bostik Blue pvc cement for about $6.50 for a small bottle from Mitre 10.
    It works fine without using a primer, just make sure that both surfaces are clean. Yes, the fumes are a bit hazardous, but use it in a well-ventilated area, and you'll be fine. It also has the added benefit of being able to heat the adhesive and pull the join apart if you've made a mistake/want to change the design.

    Cheers,

    Didn't know that you could heat it to seperate.. I thought it basically welds the two bits of pvc together ?

    I find it a lot less messy than epoxy too.. just paint a thin layer on with the brush inside the lid, Done! Comes off skin easily enough too.
    Johnnus
    Johnnus


    Posts : 204
    Join date : 2010-08-16
    Age : 25
    Location : Glen Waverley, Melbourne (VIC, Aus, Earth)

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Johnnus Tue Mar 27, 2012 1:49 pm

    Will a Magstrike pump fill up a Hydro Cannon tank faster than the stock HC pump?
    If not, can anyone recommend a cheap effective replacement pump which will fit in the HC shell?

    Also, will I need to beef up my catch spring for an OzNerfNerd spring in my AT?
    JayDesu
    JayDesu


    Posts : 166
    Join date : 2011-02-07
    Age : 33
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  JayDesu Tue Mar 27, 2012 2:01 pm

    Johnnus wrote:If not, can anyone recommend a cheap effective replacement pump which will fit in the HC shell?

    I don't know much about air tanks/pumps but apparently (Umbro) Double Action ball pump seems to wotk pretty effective (cheap? don't know - I searched 'double pump' on ebay and there are a few results but not too sure).

    Psyks thread on Hydro Cannon: http://www.oznerf.com/t2835-super-soaker-hydro-cannon-mod



    My Question: What is the Aussie replacement for Plumbers Goop? Went to Bunnings this arv - could not find... AND does anyone know how to get melted plastic off a Dremel sanding bit (rounded cone like bit).

    Thanks in advance!
    clunk07
    clunk07
    Administrator
    Administrator


    Posts : 2953
    Join date : 2011-02-02
    Age : 41
    Location : Blackwater, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  clunk07 Tue Mar 27, 2012 2:10 pm

    JayDesu wrote:
    Johnnus wrote:If not, can anyone recommend a cheap effective replacement pump which will fit in the HC shell?

    I don't know much about air tanks/pumps but apparently (Umbro) Double Action ball pump seems to wotk pretty effective (cheap? don't know - I searched 'double pump' on ebay and there are a few results but not too sure.

    Psyks thread on Hydro Cannon: http://www.oznerf.com/t2835-super-soaker-hydro-cannon-mod



    My Question: What is the Aussie replacement for Plumbers Goop? Went to Bunnings this arv - could not find

    Summit Dual-action ball pumps seem to be the best from my experience, but they're probably a bit chunky to fit in a HC shell. Maybe try using a smaller dual-action pushbike pump??

    I'm still yet to find anything close to plumber's goop in Australia. It really depends on the application, as there's quite a lot of alternatives...

    Cheers,


    ____________________________________________________________________________________________________________________________________________________________
    The Questions Thread. - Page 8 Cwc_lo10

    Clunk Weapons Co. Blaster-smith Services:
    Commissions offered on Stampede, LongShot, Spectre, LED Maverick.

    CWC Blaster-smith Services
    CWC Custom Paint
    JayDesu
    JayDesu


    Posts : 166
    Join date : 2011-02-07
    Age : 33
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  JayDesu Tue Mar 27, 2012 2:12 pm

    Octo-shot;

    Turret and plunger tube seal.

    Second (edited) question also relevant to this.
    clunk07
    clunk07
    Administrator
    Administrator


    Posts : 2953
    Join date : 2011-02-02
    Age : 41
    Location : Blackwater, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  clunk07 Tue Mar 27, 2012 2:17 pm

    JayDesu wrote:Octo-shot;

    Turret and plunger tube seal.

    Second (edited) question also relevant to this.

    Okay, so I still haven't got around to building an octo-shot yet, but from looking at MIG's tutorial, I would say that either 3-day Araldite, or better still, PVC cement would do the trick.

    With my emery stones off the dremel, I've been able to cut melted plastic off them using a sharp hobby knife. I suppose it depends on the type of plastic that's melted to it etc etc.

    Cheers,


    ____________________________________________________________________________________________________________________________________________________________
    The Questions Thread. - Page 8 Cwc_lo10

    Clunk Weapons Co. Blaster-smith Services:
    Commissions offered on Stampede, LongShot, Spectre, LED Maverick.

    CWC Blaster-smith Services
    CWC Custom Paint
    JayDesu
    JayDesu


    Posts : 166
    Join date : 2011-02-07
    Age : 33
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  JayDesu Tue Mar 27, 2012 2:22 pm

    clunk07 wrote:
    JayDesu wrote:Octo-shot;

    Turret and plunger tube seal.

    Second (edited) question also relevant to this.

    Okay, so I still haven't got around to building an octo-shot yet, but from looking at MIG's tutorial, I would say that either 3-day Araldite, or better still, PVC cement would do the trick.

    With my emery stones off the dremel, I've been able to cut melted plastic off them using a sharp hobby knife. I suppose it depends on the type of plastic that's melted to it etc etc.

    Cheers,

    Turret remains lol I'm just scratching it off with whatever I can find (thumb tacks, nails, scissors, etc) but it isn't coming off very easily.

    I'll look for that PVC cement sometime this week. Cheers!
    clunk07
    clunk07
    Administrator
    Administrator


    Posts : 2953
    Join date : 2011-02-02
    Age : 41
    Location : Blackwater, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  clunk07 Tue Mar 27, 2012 2:25 pm

    I've discovered that a lot of the stones don't work very well with plastic, but it's a painfully slow process using the sanding barrel...

    You should be able to get the PVC cement from any hardware store in the plumbing section obviously. I think Bostik call it Plumb-weld or something similar.

    Blue is general purpose, and green is for pressure applications. A lot of people use the primer, but I've had success numerous times without it. Just remember to use it in a well-ventilated area, as the fumes are a bit harsh.

    Cheers,


    ____________________________________________________________________________________________________________________________________________________________
    The Questions Thread. - Page 8 Cwc_lo10

    Clunk Weapons Co. Blaster-smith Services:
    Commissions offered on Stampede, LongShot, Spectre, LED Maverick.

    CWC Blaster-smith Services
    CWC Custom Paint
    JayDesu
    JayDesu


    Posts : 166
    Join date : 2011-02-07
    Age : 33
    Location : Sydney

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  JayDesu Tue Mar 27, 2012 2:34 pm

    clunk07 wrote:Just remember to use it in a well-ventilated area, as the fumes are a bit harsh.

    So... not my bedroom floor? lol just for clarification, its the general purpose one I want?
    Bacara
    Bacara


    Posts : 216
    Join date : 2010-06-30
    Age : 27
    Location : Bomaderry/Nowra NSW

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Bacara Tue Mar 27, 2012 2:58 pm

    PVC cement will melt all nerf plastics including PETG, it's only application is in the use of conduit or PVC. In terms of octo turrets, I recommend filling all those holes with e-putty or 5 min epoxy and sanding flat. Of course, this is greatly aided by the use of a disc sander =P. I've built a total of four octoshots now, two of them use the 5 minute epoxy method and 2 use the e-putty method. No real difference can be had between the two in terms of ranges, except the e-putty is visibly smoother and nicer looking.

    TL;DR: Only use PVC cement for PVC or conduit and use 5 min epoxy or e-putty in place of the method mig uses which involves the thin plastic folder sheet thing.
    clunk07
    clunk07
    Administrator
    Administrator


    Posts : 2953
    Join date : 2011-02-02
    Age : 41
    Location : Blackwater, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  clunk07 Tue Mar 27, 2012 5:25 pm

    Bacara wrote:PVC cement will melt all nerf plastics including PETG, it's only application is in the use of conduit or PVC. In terms of octo turrets, I recommend filling all those holes with e-putty or 5 min epoxy and sanding flat. Of course, this is greatly aided by the use of a disc sander =P. I've built a total of four octoshots now, two of them use the 5 minute epoxy method and 2 use the e-putty method. No real difference can be had between the two in terms of ranges, except the e-putty is visibly smoother and nicer looking.

    TL;DR: Only use PVC cement for PVC or conduit and use 5 min epoxy or e-putty in place of the method mig uses which involves the thin plastic folder sheet thing.

    I've used PVC cement on air tanks before, and had no issues.

    But, seeing as you've done the octo's already, I'd be following your advice 100%. So, thanks for the tip mate!!

    Cheers,


    ____________________________________________________________________________________________________________________________________________________________
    The Questions Thread. - Page 8 Cwc_lo10

    Clunk Weapons Co. Blaster-smith Services:
    Commissions offered on Stampede, LongShot, Spectre, LED Maverick.

    CWC Blaster-smith Services
    CWC Custom Paint
    Bacara
    Bacara


    Posts : 216
    Join date : 2010-06-30
    Age : 27
    Location : Bomaderry/Nowra NSW

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Bacara Wed Mar 28, 2012 11:51 am

    Well, I only know that the PVC cement works by slightly melting the PVC and fusing the two pieces together. Although I just found it melted through shells on me before. Air tanks should be fine because they're a thicker plastic I guess.
    dchil15
    dchil15


    Posts : 52
    Join date : 2011-08-16
    Age : 24
    Location : Caboolture/Morayfield QLD

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  dchil15 Wed Apr 04, 2012 11:59 am

    any one think you could set up a motor to cock the maverick automaticly?
    any ideas on how this would work?
    dchil15
    |Shadow|
    |Shadow|


    Posts : 190
    Join date : 2011-09-08
    Age : 45
    Location : Bundaberg, Queensland

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  |Shadow| Wed Apr 04, 2012 12:06 pm

    dchil15 wrote:any one think you could set up a motor to cock the maverick automaticly?
    any ideas on how this would work?
    dchil15

    You could try and copy this design without a motor or use it to help design one
    http://modworks.blogspot.com.au/2010/02/no-brand-semi-auto-blaster-internal.html
    dchil15
    dchil15


    Posts : 52
    Join date : 2011-08-16
    Age : 24
    Location : Caboolture/Morayfield QLD

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  dchil15 Wed Apr 04, 2012 12:29 pm

    |Shadow| wrote:
    You could try and copy this design without a motor or use it to help design one
    http://modworks.blogspot.com.au/2010/02/no-brand-semi-auto-blaster-internal.html

    I have seen this and I think it would work but it is not what I was thinking of. I have been thinking of this but don't have the money at the moment to try so I was asking if anyone would be able to give me a few pointers on it.


    Last edited by dchil15 on Thu Apr 05, 2012 3:31 pm; edited 1 time in total (Reason for editing : undo edit)
    dchil15
    dchil15


    Posts : 52
    Join date : 2011-08-16
    Age : 24
    Location : Caboolture/Morayfield QLD

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  dchil15 Fri Apr 06, 2012 6:18 am

    New question
    What spring do you recomend for a maverick? Where can I get it in Queensland? how much do they cost?
    dchil15
    NORTHENGHOST
    NORTHENGHOST


    Posts : 116
    Join date : 2012-02-08
    Age : 25
    Location : Boyanup, WA

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  NORTHENGHOST Fri Apr 06, 2012 7:58 am

    dchil15 wrote:New question
    What spring do you recomend for a maverick? Where can I get it in Queensland? how much do they cost?
    dchil15

    Just do a penny mod style spring mod. Chuck 3x 5 cent coins behind the spring,
    works reasonably well, easier than a new spring.

    Regards, NORTHENGHOST
    dchil15
    dchil15


    Posts : 52
    Join date : 2011-08-16
    Age : 24
    Location : Caboolture/Morayfield QLD

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  dchil15 Fri Apr 06, 2012 10:06 am

    NORTHENGHOST wrote:

    Just do a penny mod style spring mod. Chuck 3x 5 cent coins behind the spring,
    works reasonably well, easier than a new spring.

    Regards, NORTHENGHOST
    That'll have to do me until I make a nitemav.

    New question, because I love the look, where can I get a rfr without it costing me over $100?
    dchil15
    WH1PLA5H
    WH1PLA5H


    Posts : 110
    Join date : 2012-03-26
    Age : 37
    Location : Adelaide Hills

    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  WH1PLA5H Fri Apr 06, 2012 10:41 am

    whats a RFR???

    Sponsored content


    The Questions Thread. - Page 8 Empty Re: The Questions Thread.

    Post  Sponsored content


      Current date/time is Mon Jan 24, 2022 1:32 pm