Ok lets begin:
Start off with the blaster:
Unscrew the priming handle:
Then the rest of the screws
Now push the stock all the way forward to get at the hidden screws:
pull this spring off to open the blaster fully:
Now open up the shell:
Take out the Handle:
Take off the clip housing:
Remove the plunger assembly:
Now remove these locks and screws housed at the rear of the blaster:
And these locks:
Replace the clear piece:
Now the stock should come off easily and repeat the step on the other side of the shell:
Unscrew the battery pack and set it aside:
Now remove the other half of the clip housing and remove the spring at the front of the blaster that rotates the blaster:
Put it back in:
Now drill out the air restrictor remove the locks etc:
Screw the battery pack back in:
Replace the handle and the shell and screw it all in:
(This is optional) use a hacksaw to saw off the handle:
Now break out the Hot Glue OR the knead it:
Now hot glue or knead it around the handle and the clip well:
And the final product:
Start off with the blaster:
Unscrew the priming handle:
Then the rest of the screws
Now push the stock all the way forward to get at the hidden screws:
pull this spring off to open the blaster fully:
Now open up the shell:
Take out the Handle:
Take off the clip housing:
Remove the plunger assembly:
Now remove these locks and screws housed at the rear of the blaster:
And these locks:
Replace the clear piece:
Now the stock should come off easily and repeat the step on the other side of the shell:
Unscrew the battery pack and set it aside:
Now remove the other half of the clip housing and remove the spring at the front of the blaster that rotates the blaster:
Put it back in:
Now drill out the air restrictor remove the locks etc:
Screw the battery pack back in:
Replace the handle and the shell and screw it all in:
(This is optional) use a hacksaw to saw off the handle:
Now break out the Hot Glue OR the knead it:
Now hot glue or knead it around the handle and the clip well:
And the final product: