HAI GUYS!
Alright, like everyone, I had a useless blaster lying around, my tek 3, after attempting an AR removal it didn't work any more (my first mod ^_^) so I just left it lying around, but now, since I actually had some materials, I thought I'd fix it (or at least attempt to) and it worked.
Materials -
Hot glue
Epoxy
20mm Conduit
16mm Conduit
Lube (Vaseline)
Keyring
Tools -
Drill/Dremel
Pipe cutters/hack saw/ whatever you use
Hot glue gun
Sand paper
Before
Take these out, they're useless now
So now make the air hole on bigger, I just drilled straight through and sanded it
Cut 5cm of 20mm conduit and epoxied it on, then I cut 7.5cm of 16mm conduit, nested it in there and epoxied and hot glued the lip of the 20mm counduit
With the plunger and rod, I added e-tape and another O-ring, stretched the spring , replaced the handle with a keyring and lubed it up with Vaseline, this gave a 100% seal
It won't shoot a standard sized dart but it shoots a minimized one I had, its got a hot glue tip and a straw with hot glue in the rear
New internals
Okay, with paint I used the following citadels paints; Chaos Black, Primer; Dark Angel Green, Liche Purple and Boltgun Metal for the body; Enchanted Blue for detail and Nauseating Blue for the trigger
After
Now it shoots 7.5m with the minimized stream line, but it works, thats all that matters.
Yay ^_^ first write up complete
Evo out >.>
Alright, like everyone, I had a useless blaster lying around, my tek 3, after attempting an AR removal it didn't work any more (my first mod ^_^) so I just left it lying around, but now, since I actually had some materials, I thought I'd fix it (or at least attempt to) and it worked.
Materials -
Hot glue
Epoxy
20mm Conduit
16mm Conduit
Lube (Vaseline)
Keyring
Tools -
Drill/Dremel
Pipe cutters/hack saw/ whatever you use
Hot glue gun
Sand paper
Before
Take these out, they're useless now
So now make the air hole on bigger, I just drilled straight through and sanded it
Cut 5cm of 20mm conduit and epoxied it on, then I cut 7.5cm of 16mm conduit, nested it in there and epoxied and hot glued the lip of the 20mm counduit
With the plunger and rod, I added e-tape and another O-ring, stretched the spring , replaced the handle with a keyring and lubed it up with Vaseline, this gave a 100% seal
It won't shoot a standard sized dart but it shoots a minimized one I had, its got a hot glue tip and a straw with hot glue in the rear
New internals
Okay, with paint I used the following citadels paints; Chaos Black, Primer; Dark Angel Green, Liche Purple and Boltgun Metal for the body; Enchanted Blue for detail and Nauseating Blue for the trigger
After
Now it shoots 7.5m with the minimized stream line, but it works, thats all that matters.
Yay ^_^ first write up complete
Evo out >.>