Simple Hunter Mod

Hai guys,

I managed to get a the hunter twin pack and I did a simple mod to one of them.

Materials
- E-tape
- Lube
- Spring (optional)
- A length of 15mm

Tools
- Drill
- Screw drivers
- Hammer

First, take out all the screws, all are the same except one, a larger screw will be in the bottom of the stock. After that remove the plunger tube and bolt. Remove the screws that hold the bolt and plunger together also







Next Drill out the AR




Next, E-tape under the O-ring and hammer out the pin at the rear of the plunger rod and add a spring (I was about to swap for an NF gen 2 spring but i was like nahh at the last minute)




Finally, put it together and inserted a decent length of pvc, that fits perfectly, into the front barrel for a barrel extension.



Before the range was awful, now they are decent. Once I get more materials I will mod it further, paint it and add a scope, but this is all for now.

Evo out >.>

So the range was......?
So the range is now...?

I can tell you now the Hunters boast ranges of 20-25ft. I' reckon with those simple mods, it'll be hitting around 45-50ft. Thanks for the write-up =). I'm looking to see the rest of it XD.

Is the PVC just for looks or does it help in any way?

I might have to get one. : )

The PVC will make it have less range

You could try putting some Petg in the PVC, like that of a lazy LS breech. I've found it increases range by 15ft in my LS, I'd love to see one in a hunter, just for fun.

bulletproofvest wrote:The PVC will make it have less range

I think it's just there for cosmetic looks. The Buzz Bee Hunter is perfect for this cosmetically making it look good.

Yeah, in my opinion it looks like crap stock, as it's too short. Adding a barrel makes it better. Maybe a stock would be sick if I ever get one