The Questions Thread.

what is the best glue available from bunnings to use in an integration

http://www.ebay.com/itm/140652932988?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_2794wt_1163

Good battery? Also what are the cables and head called?

Anyone from SA seen any tac vests on their travels?

Hey guys, just a quick question where can you get check valves? thanks.

evozn wrote:http://www.ebay.com/itm/140652932988?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_2794wt_1163

Good battery? Also what are the cables and head called?

Not really...

These ebay packs generally blow.

Check out deal extreme unprotected trustfires.

There's a ton of information on them here and on SGnerf.

I actually posted a very useful guide on here a while a go. Mostly written by SGnerf but with added links, comments, etc. so that Aussie guys can make use of it too.

http://www.oznerf.com/t3059-stampede-battery-guide?highlight=battery

thekungfunerfer wrote:Hey guys, just a quick question where can you get check valves? thanks.

I've heard you can get them from Kmart, I didn't have any luck there so I just ordered some from

Here

Postage is $8.50 minimum.

Can I use hydro seal to apply to my BBUMB O ring? I added about 3 or 4 wraps (more or less) of e tape under the o-ring.

So can I use hydro seal? If so do I need to rub off all the previous lube.

Last question is 3 or 4 wraps (more or less) of E tape under the BBUMB O ring too much? Or is it ok.

Ungmon wrote:Can I use hydro seal to apply to my BBUMB O ring?

Yes.

Ungmon wrote:If so do I need to rub off all the previous lube?

No but I'd do it anyway.

Ungmon wrote:Last question is 3 or 4 wraps (more or less) of E tape under the BBUMB O ring too much? Or is it ok.

You tell us. Try it, out don't just ask useless questions.

Ok but why would you rub off all the origional grease?

Anyone made a ring catch before? (Like the one in an R3) If so, I'm a bit puzzled about the type of screws used. If someone could give me some tips on building it?

Ungmon wrote:Ok but why would you rub off all the origional grease?

Because mixing greases is bad, they may have different compositions and may react poorly with each other, leading to a ruined o-ring and tears. When I relube my blasters, I make sure to wipe out the old grease, which may have collected dirt and fine particles. I do this even if using the same type of grease.

Regarding hwo many e-tape layers. You can't really ask that question because none of us can accurately answer it. Ungmon, before you ask questions, try to at least test it out yourself. It seems like you're becoming an ongoing jukebox, clarifying things that most of us has clarified for you.

Teflon tape is better and causes less friction and generally 3 wraps is enough of that, but as e tape is thicker, it requires experimentation

What barrel length do I use for making a shotblast shoot darts?

And

How do I make a keyring trigger for it?

Joker wrote:What barrel length do I use for making a shotblast shoot darts?

You know that already. (I told him via Facebook, I'm not just being an ass)

Joker wrote:How do I make a keyring trigger for it?

There's actually a YouTube video about that, it's not great but it is helpful. Try a quick search.

I want to make something like this, any tips on how to make a raider bolt-action?

Also, where can I get one of those grips/foregrip he has on his below... >

https://www.youtube.com/watch?v=QUDJwktVjqA

You can get a grip off black tactical or deals extreme, but you'll have to find your own rail.

What do you mean "own rail," You mean Bolt Action thingy?

No, you'll need to get your own attachment rail.

How is bolt-action even related to a foregrip?

Ohh no, misunderstanding. I know for the foregrip I need my own rail attachment, but I still am unsure about the Bolt Action aspect of this project.

Well, you just need to attach a rod to the boltsled, allowing you tpo prime the blaster and move the breech.

Ohh Ok, thanks Swats, Big help!

Also Swats, when I attach the rod (By drilling?) Which part of the raider boltsled do I put the rod through? I'm unsure.

So am I, just try to do it without messing up any of the moving parts.

Could someone point me in the direction of a singled magstrike tutorial please?

Lefty done one, look on the mod dic thead why don't you just do the RSCB to the BBUMB?

Magstrike doesn't really work for singling like a Titan/BBUMB type blaster does.

@SuctionCup. If you can't google it. It's usually hasn't been done before. So asking us where we can direct you to a write-up isn't very practical. I will give you some advice though, the HydroCannon uses an air bladder, shoots ridiculously far. You will just have to figure out how to make the magstrike shoot in one shot as well.

Is there any air tank or working internals that could fit in the true heros M9 looking blaster?

And does anyone know how to change the sounds because originally this blaster just made sounds but I want to substitute my own sound into it.

Maybe a at2k tank?

I have been modding a nite finder and the c-836 spring doesn't fit in the plunger tube
I was wondering if anyone else has had this problem and/or knows how to fix it

likes2mod11 wrote:I have been modding a nite finder and the c-836 spring doesn't fit in the plunger tube
I was wondering if anyone else has had this problem and/or knows how to fix it

Cut two coils off the spring.

I already did
I forgot to ad it wasn't fitting because it was to wide

@Likes2mod: Didn't get a c836 then. My guess is you got a c830, which is too wide for a NF plunger tube.

@Evozn: You would probably need to change up the soundboard, is my bet. As for an air tank, 2k is probably best bet.