Home
Here it is:
I got it at Black Tactical for about $8.50 (not including shipping that is). Unfortunatly that packaging doesn't have any funny engrish on it.
Out of the packet now and damm does that look realistic. Its light and fits ok in my hands, but the trigger is a little small and my finger only just fits. Its primed by pulling back on the slide. its fun and looks cool that way.
It came with 6 suction darts that are pretty decent. and under the handle is a little piece where you can store 2 darts on.
It only gets about 5 meters using the stock darts. not good. I'd better fix that.
Like This!
Take out the screws and remove the slide, there is one hidden under the slide
On the subject of screws, these ones are tiny. the silver one is from a signal launcher just for comparison.
Pull it open and you're greeted to the internals.
as you can see, it uses an inverted plunger, very simmilar to a maverick.
For modding you could drill out the peg inside the barrel and be done with it, but the barrel is a very loose fit. so i got my self a 8cm piece of Hep20 for a barrel replacement. the stuff is basicaly the same diameter as the stock barrel. how convenient.
See that black rubber piece on the stock barrel
take it off and glue it to the Hep20. Make sure you remove all the lubricant off of it first. I used Araldite to glue it on, hot glue wasn't cooperating.
When thats dry put the internals back into the gun, and make note where tha barrel sits. you'll want to glue it in place so it doesn't fly out when you shoot it. Just hot glue it in, its slightly less permanent glue if you ever want to remove it. also make sure you only glue it to one side, so you can open the gun again.
And there you are. Now it can hit 10-11 meters using nerf tagger darts, or about 7-8 using the stock darts.
WARNING! make sure you paint it in eye raping colours before taking it outside. Plus everyone knows that adds a ton of range to it.
I got it at Black Tactical for about $8.50 (not including shipping that is). Unfortunatly that packaging doesn't have any funny engrish on it.
Out of the packet now and damm does that look realistic. Its light and fits ok in my hands, but the trigger is a little small and my finger only just fits. Its primed by pulling back on the slide. its fun and looks cool that way.
It came with 6 suction darts that are pretty decent. and under the handle is a little piece where you can store 2 darts on.
It only gets about 5 meters using the stock darts. not good. I'd better fix that.
Like This!
Take out the screws and remove the slide, there is one hidden under the slide
On the subject of screws, these ones are tiny. the silver one is from a signal launcher just for comparison.
Pull it open and you're greeted to the internals.
as you can see, it uses an inverted plunger, very simmilar to a maverick.
For modding you could drill out the peg inside the barrel and be done with it, but the barrel is a very loose fit. so i got my self a 8cm piece of Hep20 for a barrel replacement. the stuff is basicaly the same diameter as the stock barrel. how convenient.
See that black rubber piece on the stock barrel
take it off and glue it to the Hep20. Make sure you remove all the lubricant off of it first. I used Araldite to glue it on, hot glue wasn't cooperating.
When thats dry put the internals back into the gun, and make note where tha barrel sits. you'll want to glue it in place so it doesn't fly out when you shoot it. Just hot glue it in, its slightly less permanent glue if you ever want to remove it. also make sure you only glue it to one side, so you can open the gun again.
And there you are. Now it can hit 10-11 meters using nerf tagger darts, or about 7-8 using the stock darts.
WARNING! make sure you paint it in eye raping colours before taking it outside. Plus everyone knows that adds a ton of range to it.
