KingCam's 16mm Conduit

In short, it's good stuff. Perfect springer fit on Inform3r's blue foam and converted streamlines, I also use it on my at2k, and it works flawlessly. Would recommend it to anyone who asks. KingCam is also quick to respond to inquiries and PMs, and has very reasonable costs for shipping.

Two thumbs up from me!

How much would it cost?

His sales thread states $3 per meter, with couplers coming in at $2 each.

How mich would shipping be to 2063.

I don't know, you'd have to ask him.

If you go to the Australia Post web site, you should be able to get an idea of the cost of postage.

I'm curious to know what brand the conduit is. I'm using AussieDuct that I've bought from a Middy's distributor and I find that stuff to be rather daft (a bit tighter than a 17/32 brass fit which I find unsuitable).

Also, $3p/m is very well priced to you lot. There doesn't seem to be much profit to KingCam on his behalf, if any.

Silent Scope wrote:I'm curious to know what brand the conduit is. I'm using AussieDuct that I've bought from a Middy's distributor and I find that stuff to be rather daft (a bit tighter than a 17/32 brass fit which I find unsuitable).

Also, $3p/m is very well priced to you lot. There doesn't seem to be much profit to KingCam on his behalf, if any.

It is true what Silent Scope said cos im only making $1.10 p/m on my 16mm conduit after I buy it from the shop where I get it from.

@Silent Scope it is 16mm conduit made by AussieDust I buy it from Middy's at Lilydale.

here the link to my sale page KingfCam's Sale's Page.

@ SS. Mine is the aussie duct.

The ID is 13mm, give or take a few .00 of a mm. I use it in my springers and air blasters. I use both white 13mm FBR and streamlines. Yes it is a very tight fit with the FBR but i still dont get this hole "air/springer gun fit thing. The alu that i have is an ID of 14mm(13.8ish mm) and I find that i get beter power and range with the 16mm UPVC. In the alu streamlines just fall out the end, and most of my FBR darts do too.

I will have to do some "real" comparison testing with both. I should also get my hands on some brass and give it a try and some hep20 stuff or what ever it is. Once i have I will let you all know what results I get.

I can tell you that 16mm UPVC will shoot streamlines out of titans very nicely .