Home
Hi there this is my first modify post so please leave positive feedback !
First we will be making extra dart holders on the sides so all together you will have 9 compartments for your darts including the dart in the firing compartment!
Here are the materials:
* 1 and a half cm hight and 6 and a half length of tube x6
* zippy clip (get 2 and join them if its not long enough)
* a tube of silicone glue
* a saw or a cutter
Step by step:
1. get a long tube or two then cut it down to 6 and a half cm x6 (warning the tube has to fit a suction cup dart)
2. Grab 3 cutted tubes that you just cut then put them in to a triangle shape like this . Then stick it together with the silicone.
. .
3. Wait till the silicone drys then put silicone all over the orange line next to the NERF symbol and just above then put the glued tubes on the doubled side repeat step 2 and 3.
4. Next grab 1 of the zippy clip and clip around through the trigger hole then around if to short clip on another then join it so then it can hold while drying!
5. Once dryed get a stanly knife then cut off the extra glue and if you don't want the mod any more then get the stanly knife and cut through the glue.
BONUS MOD:
1. By the way this is a simple mod just grab a silly ruber band then tie it on the cocking mech adnthen strech it of the front so then it does not slow down the air!
Please don't give any negitive feedback I am new to moding. If you can't understand my instructions just wait til i get the pictures up trust me it will be easier!
. .
First we will be making extra dart holders on the sides so all together you will have 9 compartments for your darts including the dart in the firing compartment!
Here are the materials:
* 1 and a half cm hight and 6 and a half length of tube x6
* zippy clip (get 2 and join them if its not long enough)
* a tube of silicone glue
* a saw or a cutter
Step by step:
1. get a long tube or two then cut it down to 6 and a half cm x6 (warning the tube has to fit a suction cup dart)
2. Grab 3 cutted tubes that you just cut then put them in to a triangle shape like this . Then stick it together with the silicone.
. .
3. Wait till the silicone drys then put silicone all over the orange line next to the NERF symbol and just above then put the glued tubes on the doubled side repeat step 2 and 3.
4. Next grab 1 of the zippy clip and clip around through the trigger hole then around if to short clip on another then join it so then it can hold while drying!
5. Once dryed get a stanly knife then cut off the extra glue and if you don't want the mod any more then get the stanly knife and cut through the glue.
BONUS MOD:
1. By the way this is a simple mod just grab a silly ruber band then tie it on the cocking mech adnthen strech it of the front so then it does not slow down the air!
Please don't give any negitive feedback I am new to moding. If you can't understand my instructions just wait til i get the pictures up trust me it will be easier!
. .
