Post PICTURES of your modded, original works! (PICTURES ONLY! - NON-PICTURE POSTS WILL RESULT IN AN AUTOMATIC 7-DAY BAN!)

AR's removed from clip, tighter o-ring seal, hair trigger, trigger lock removed. Pretty much the usual mods - will be adding a led bladder-pressure indicator light soon.

Ranges: 72 ft average, fired from hip with slight angle

The result of 3 hours work...



I don't know the ranges yet but It's going in one side of the box and out the other then leaving a dent in the wall. (At least 110ft)



I love this thing and for only $16 it was a steal, oh yeah, and I have one more!

You Brissy guys will be seeing this soon...

NiteFinder/SecretStrike integration




Here is my NiteFinder with all he usual mods;
inc. air restrictor removed
springed c836
teflon under the 'O' ring
and an integrated SecretStrike where the dart holders were.

Allowing you to fire an extra dart when your enemy think your out.

Simply open SecretStrike and remove casing and fit into the NiteFinder where the dart holders were.

I haven't done something so simple in quite a while; it's good to get back to basics.



Is it really that hard to slap a 16mm UPVC coupler setup and utilise 16mm UPVC barrels and speedloaders?

LSG 8-Shot.

My stike fire:



I covered the gaping hole in the bottom with some plastic from a DVD case but only super glued it on one side of the shell so i can still open it up.



It gets around 25-30ft flat and im going to be painting it soon.

My nitefinder:



It's got 2 dart holders in the handle and I still have to cover up the hole in the bottom.



It's got a strike fire spring in it as well as the stock spring and it gets about 40ft flat every time.

Sorry for the crappy image size, I had to take it on my webcam.

Glued-barrel NF, modded in under 30 minutes. (And another day for the goop and plastic pipe cement to dry.)


No need to boil it, etc. In fact, I make use of the fact that it's glued together.

Titan with Vents/AR's removed, plugged pump, clip-fed conduit/petg breech.



The original rocket attachment has been replaced with a 1 1/16" socket, with a piece of aluminium tubing nested inside of it. 25mm conduit coupler nested inside of that, and 20mm conduit inside of the 25mm. Barrel is approximately 60cm long.

Angled ranges of 350 feet to 400 feet, with 2.4g blue foam darts.

I went on an NF modding frenzy lately. They all have McMaster K26 spring, two mini-bungees, CPVC coupler, and electrical tape under the o-ring so each vacuum-loads.

===

Minimized NF with a front dart holder and taped gap. Yes, the tape won't survive if I open the blaster, but that's not the point. I just want to cover the opening. Directly in front of the trigger guard I shoved a piece of 1/2 CPVC in 1/2" PVC as a dart holder.


===
These are destined to be given away to coworkers, so they have 2.5" CPVC barrels for stock darts.

Close-up:


===

Three of them, side view:


===

Same three, front view:

My nearly finished Octo shot. Great fun this blaster. Thanks to makeitgo for this.



Big arse rear stock and LED thrown on, everything has been finished except the paintscheme. When painted will post final pic.

My almost-finished AT -- nicknamed "Scrotty" because of the, erm, "unique" shaped clip

Here is Neumein's stampede commission I did. Turned out better than I thought.

It's a BrokenSVT Tank-Expanded SSPB (TESSPB), but I found an interesting carry method - by using the tank expansion hose as a ring, I can carry this pumped and ready, out of the way until I flip it into position.

===

For those who haven't seen his TESSPBs, here's a sample (but not the one he sent me)


The differences are that mine has a PVC tank instead of CPVC, and ended in a CPVC coupler, instead of the Sch. 80 barrel. It hits well over 90' with a 6" CPVC barrel. He's seen it hit 107'.

===

I liked it so much, I gave it a try myself:


The tank only looks bigger. It's actually 3/4" CPVC over 1/2" PVC. I like the more even tank look. Glue is still drying, so ranges are ... 0.

I've decided to post here of the Triple Shot/Shot Gun/Quad Shot/Hand Cannon plunger head setup Louiec3 uses.





It uses a ballcock washer, with a 8-32 tapping set and the assorted washers and screws with it. This setup allows you to retain the stock plunger tube and assembly while providing a bloody good seal.

NOTE: This has currently been tested to work with any of the Air Zone branded models. The ballcock washer is too loose to use in the Hand Cannon models. Bear that in mind.

Have fun with the idea.

Thanks to SS I now have an air tight TS.





Yes, that is a home made washer...

Finished LongShot Project V3:

I finished my Octoshot, and all gratitude and thanks go to makeitgo!!
no makeitgo, no turret, no Octoshot!


Also, since Ahtanie was kind enough to bump my vid and Rogue over here has done up his Longshot-Barricade integration, here's my finished "Big Yellow" project, a hoppered Longshot-Barricade integration.

I hoppered it because my boltsled gave way and I was just plain lazy to repair / reinforce it. After all... Razgriz has already done a beautiful job on hoppering the Longshot for his Vengeance, and so I took the cue from that.



Held together securely via machine screws


I inserted a stock Raider spring inbetween the wye and the plunger tube to act as a return spring


The detailing on the left side of the blaster


The barricade battery slot with a piece of the LS shell cut and stuck on for cosmetics, and you can see the keyring trigger that activates the barricade's firing mech


Everything is on the left side of the blaster, simply because I'm south-pawed.

If any of you are interested, I have a vid of this up on my youtube channel, but since this thread is "Pics only", I'll adhere to the rules

Nothing exciting, just a Spectre with BT spring, AR's, improved turret/plunger seal, plunger deadspace decrease etc etc

Really just testing out my stencils. From this, they still need quite a bit of work - or at least an airbrush.



And as per request, my collection of painted blasters thus far:



And my new Hellsing Arms titan Icarus. Relocated and replaced pump with a dual-action ball-pump, petg barrel etc etc

Hot in the foot steps of Goonies ghetto longtit, I present the longbumb. Had some trigger trouble but now, "shoots far".



Dart after 10m shot in to shed wall....shreded




Edit: 2120- may do some basic photos and details in the near future. Pretty much the same as Goonies longtit just less ghetto.

Could you do a bit of zooming in on the part where you cut off the shell? I've got a LS shell atm, and if it's not sold I could totally do that mod.

And now a photo so I satisfy the requirements of this thread. My BBUMB with a 15mm PVC coupler and a foot long 20mm orange conduit breech with PETG nested inside.

My first intergration, the 'Misslemav'

Repeat about me kiddies:

SILENT SCOPE HAS A FUCKING CROSSBOW LOL 10001010100101





All of them were delivered to me during this week.

PS: I took off censors to help emphasise the nature of this glorious moment. They are now turned on again.

Play this tune as the badass power-up song:

My finished Octo-Shot Ready for M6. It's on Baby!!! BRING IT!!!!

Pictures speak louder than words.







Noice eh?

and @Makeitgo: I love that paint job!! its EPIC!!

- Brad

Nerf Dart Tag 2011 line-up:

Got bored with the Misslemav pretty quick so I built something more practical


Under barrel grenade launcher


Still a bit ghetto but it works

Game over, man, game over.

My version of Longshot Alien Pulse Rifle. It has front gun integration with front pump action connected to the priming bar. Other usual simple mods of AR removal, plunger padding, aluminium reinforced bolt sled and added Nite Finder spring.

Not modded yet, but my haul of blaster's today. Took 3 trolley's to transport all of this:

Modified Super Soaker XP150. Added Recon stock and 18 inch Barrel with coupler. Shoots over 250 flat!!! EXTREMLY LOUD. I shoot Ikea catalogs and phone books with it because cardboard boxes and aluminium cans are no match for this thing.

My friend and I compared this to his paintball gun by shooting the back of an old book shelf from Ikea at the same distance. His paintball gun consistantly made significant dents in the crappy back panel but my Super Soaker using hot-glue-tipped-fishing-weighted Stefans pierced the panel everytime! Some actually made it straight through. His ROF was WAY higher though, obviously. I have to pump it 40 times to be fully pressurize each time.


With my Octo for comparison.

Using the barrel as an accessory rail. In this case, having a 'backup shot' that quite possibly outranges the dart being propelled through the barrel.

The barrel clip is a chunk of 3/4" PVC cut with ratcheting cutters, with the edges filed down. It's solvent-welded to the expansion tank of the TESSPB, and snapped to the barrel, so it's easily removable. It's underslung because that's the way gravity will orient it after some bouncing around on the field.

I may add a zip tie or string to secure it, but that's more belt-n-suspenders than anything else. The 240 degrees of PVC is plenty stable.

Nearly finished. Still to add bolt lever to top front of bolt sled and some extra reinforcement to pump handle, I've already fractured it.

Current mods are;
Brass breech
BT and stock spring (may be to much with the pump action)
All locks removed
Pump action
Total shell reinforcement (now it's probably to heavy!)



While we're at it we also finished a TS with a V2 spring, MIG reinforced shell and RSCB. MIG's octo guide is a definite for blaster longevity. This is definitely a blaster for the novice modder, easy to mod and an excellent plunger size mean alot more bang for your buck.

So I finally made use of my chopped up Firefly turret...
Inspiration drawn from Zorn's "Sylow Conjugator", Ahtanie's Modded BBBB, and Broken_SVT's LAHB of the same make, using a SorrowX turret.

Presenting my 8 x Jialat Jialat. LOL



and although I have rear loading slots, you can see how messy it is on the inside. haha


Write-up (video write-up, actually) coming soon. Editing the footage now.

In any case, I doubt you guys understand what "Jialat" means.
It's a Singlish term which is used to, a certain extent, the same way you would use the word "serious".

Like, "if you get shot by a plugged BBBB 20ft away, that's damn serious."
or "if you get shot by a plugged BBBB 20ft away, that's damn jialat."

or "Jialat, my boltsled broke on me halfway during the round!"

Here's my overhauled Stampede as per SGNerf's mod guide, coupled with Reflex sight, flashlight attached to Recon sight (plans to use a clamp rather than Duct tape :P) and Raider drum. Second shot is my humble Nerf collection.

Lets try and keep this Stampede theme going


My stampede (Duh) Deploy sling, 12v Mod, And some random spring thats really strong (Thats what she said)

And i figured, Might aswell put up ma collection

Just throw 'em all in there,