Mod Materials Sales: INTEREST

I was wondering if anyone would be interested in the following:

-Cheap LEDs in multiple colours, 3 and 5mm varieties as low as $1.75 each for Blue Diff. 3mm 3.7v types

-Possibility of a microprocessor controlled Stampede fire selector module. For those of you who don't know, I rather handy with electronics and I also have intermediate knowledge of programming AMTEL and also PIC microcontrollers. I have some schematics draw up for this, but no circuit board layout or some final adjustments necessary for correct function. No ETA or price offered, sorry.

-Conduit, in 16, 20 and 25mm varieties, I'll buy in bulk and pass on the savings.

-Custom Springs: Mainly insanely strong ones, but maybe some other basics. I have some designs, just need to get the prototypes made.

-Aluminium, carbon fibre and polycarbonate sheet at a competitive price.

-Completely airtight, plastic breaches- huge improvements over stock ranges, without the complications of brass- a direct fit, also will load clips normally. Once again, still in development, but they WILL be built.

-Voltage Upgrade Kits: A set of Trustfire Unprotected AAs and a charger.

-A modified Stampede battery tray, completely rebuilt, designed to take AA holders. Outsourced to an injection moulding company in China Still needs to be refined in CAD, but will be available to look identical to stock, just with redesigned internals.

Thats about it for now, although I will update with more if required. PLEASE tell me what you think! Your feedback is appreciated.

Sounds good, I'd probably be interested in wyes and PETG as well.

False wrote:Sounds good, I'd probably be interested in wyes and PETG as well.

Good idea on the Wyes. You got me thinking... I might try to get some CPVC. It might be pricey though. I'll look to sort it out.

Very, very interested. I'd be a regular customer for the polycarbonate sheet (Could you do tube?) and aluminium sheet. Maybe carbon fibre too.

Unknown wrote:Very, very interested. I'd be a regular customer for the polycarbonate sheet (Could you do tube?) and aluminium sheet. Maybe carbon fibre too.

Yeah, I'll look into tube too. Geez, look at all the stuff I overlooked! Lolz

Those custom breeches sound good, and the springs And stampede tray appeal to me

Unknown wrote:Very, very interested. I'd be a regular customer for the polycarbonate sheet (Could you do tube?) and aluminium sheet. Maybe carbon fibre too.

+1 on the polycarb and tube, acrylic rod too perhaps...

Cheers,

Get some piccy's up and it will help your cause =). Especially for the poly carb

littlebro05 wrote:Get some piccy's up and it will help your cause =). Especially for the poly carb

I'm still asking around for pricing, so I really can't show pics of the polycarb. I have had some samples, but they are all cut up. They are all what would be expected from polycarb. I don't want to upload the Stampede select fire module schematic, as its not complete, nor do I want it open source. Otherwise, most of the materials are pretty standard, and some of which I haven't acquired yet due to the fact that I still am getting pricing. I really don't think that everyone needs to see some LEDs. But I put up pics will as soon as I have something worth posting.

I'd like to see PVC rod.

I'd be very keen for the fire selector for the Stampede. Been looking into a mosfet setup for my own projects, but EE is not my strong suit so it's all still a little over my head.

If you're going to the extent of programming microcontrollers, maybe you could go as far as to include an ammo counter and/or a last round killswitch, perhaps using IR photogates (to stop dry firing)? I've been wracking my brain on how to accomplish a last round killswitch that along with others over on nerfsg forums, with no luck as of yet..

Just some suggestions!

stoph wrote:I'd be very keen for the fire selector for the Stampede. Been looking into a mosfet setup for my own projects, but EE is not my strong suit so it's all still a little over my head.

If you're going to the extent of programming microcontrollers, maybe you could go as far as to include an ammo counter and/or a last round killswitch, perhaps using IR photogates (to stop dry firing)? I've been wracking my brain on how to accomplish a last round killswitch that along with others over on nerfsg forums, with no luck as of yet..

Just some suggestions!

Wow, those are sue great ideas! I'll keep them in mind when make a second schematic with a different micro controller.

Here's the LINK to the last round killswitch discussion thread over at the nerfsg forums just to show you what's been considered already. (gotta be a member to view)

some nylon rod would be good.
i will probably buy some polycarb too.

Eclipse wrote:

littlebro05 wrote:Get some piccy's up and it will help your cause =). Especially for the poly carb

I'm still asking around for pricing, so I really can't show pics of the polycarb. I have had some samples, but they are all cut up. They are all what would be expected from polycarb. I don't want to upload the Stampede select fire module schematic, as its not complete, nor do I want it open source. Otherwise, most of the materials are pretty standard, and some of which I haven't acquired yet due to the fact that I still am getting pricing. I really don't think that everyone needs to see some LEDs. But I put up pics will as soon as I have something worth posting.

Yeh mate, pic's really shouldn't be needed, as this is an expressions of interest thread. If it goes ahead, obviously you'll start a new sales thread, with pic's of your items.

Cheers,

BUMP

Please respond and give me some ideas on anything you'd like to see. I think I might be able to be some American CPVC and also Sch. 40 PVC as well.

Get some singaplastics stock

natious wrote:Get some singaplastics stock

I looked at their website and haven't found what we'd be after. What pipe am I looking for?

singaplastics upvc, 13,16,20,25mm's, various couplers.

evozn wrote:singaplastics upvc, 13,16,20,25mm's, various couplers.

Thanks mate, I'll see if I can get my hands on some.

would love to buy polycarbonate and any tubing available, i live in the country and supplies like that are hard to come by... those breechs sound interesting...

goop, lotsa goop.

interesting, reckon you could get carbon fibre tubing as an occasional special order?

cfb_rolley wrote:interesting, reckon you could get carbon fibre tubing as an occasional special order?

I'm curious, what would you use this for ?

Actually, I'd potentially be using the tubing to build my own bike frame, but it could also have uses for a homemade if you wanted it to look pretty different.

cfb_rolley wrote:Actually, I'd potentially be using the tubing to build my own bike frame, but it could also have uses for a homemade if you wanted it to look pretty different.

I'll look into it. The supplier I was looking a for the sheeting appears to not have tubing, so I might have to shop around to see who will have tube and sheet at a good price.