Mod Ideas Thread

Yes, there is a bit of room inside the shell, but you'd have to replace the plunger tube too, because the most powerful spring in the world isn't going to help you much, when you've got a plunger tube the size of my little finger.

EDIT: @Frankie27: I'd say whack the coupler right on the end of the plunger, and go from there. You'd have a bit of room left over where the hold barrel was, maybe you could even integrate an airtank in there? Methinks a Hornet tank would fit in there.

I know these arem't new but they are pretty cool mods and I'll be trying them soon.

Pullback Longshot
Singled Recon

Hey just thinking about the vulcan, now I know this gun is pretty damn crap except for the novelty of fast shooting belts, but would removing the cross bars and sticks in each little barrel increase range? Also it allows stefans to be used.

The vulcan isnt that bad, it just needs a few mods done, like AR removal (internal) and a better spring and it comes up pretty ok really

Servulus wrote:The vulcan isnt that bad, it just needs a few mods done, like AR removal (internal) and a better spring and it comes up pretty ok really

oh kool i havent seen any spring rienforcements and Ar removals for the vulcan, is it easy? i just dont want to mess with all thos wires for the mechanism.

May I present: The Mavrick Sniper

Features:
> Quick connect air tank
> Hammer actuated piston valve located in a "T"
> Home made hammer
(video of hammer, since then it has been upgraded) https://www.youtube.com/watch?v=SSJsEaeHOw8
> Stock and extended barrel



Expected results:
My guess is as good as yours, however i think this should get to about ~150ft @ 100psi

Pardon me, but that's a homemade in a Mav shell using a Mav turret.

Yeah its an extreem mod, but its still a mod. If it was fully home made then i would put it in the homemade forum. By your arguement most of the guns in this forum should be in the homemade forum

chinnerz wrote:

Expected results:
My guess is as good as yours, however i think this should get to about ~150ft @ 100psi

100 psi? that is a lot of pressure, and I must also say that it is:

A. Illegal.

B. Seriously not a good idea.

C. What is the point of this gun?

I can get 100ft out of a Mega misile size chamber at like 30-40PSI, 100 is total overkill you'll just shred your darts.

Also, this would be a homemade, as the propulsions system does not come from any nerf gun, and also yes it is both illegal by AUS weapons laws and also the use of homemade airguns at nerf wars is not allowed. homemade springers have much less potential to go wrong or damage the user/other players, however when dealing with pressurized air there are too many safety factors to consider.

Aj

xthepivotkidx wrote:
oh kool i havent seen any spring rienforcements and Ar removals for the vulcan, is it easy? i just dont want to mess with all thos wires for the mechanism.

I removed the AR and it wasnt too hard, but first time i opened it up i had the same thought of not wanting to mess anything up. But at a closer look i found it not to be complicated at all.

I have a mod/overhaul in mined for it and once done i will post pic and writeup,waiting on some materials.

gooni

Titan with a air Commpression unit ( don't no what it's called also like the one sgnerf has on his magstrike) ar's removed and a hopper clip it would pwn.

Its like this thread.

Uin13/ice(nh) has done it before, i know you will have alot of people running from you lol.

https://www.youtube.com/watch?v=bPKcq8bCVSQ

I've been planning to put mega missile internals (or something with similar internals) inside a buzzbee rapid fire rifle, and try to keep the capability to use a magazine.

Well, It isn't really and idea, its a WIP, I have put my titan tank into my longstrike shell and so far so good. All I have to do know is hook the trigger up to the pin ( wich is going to be a pain in the ass).
I will post pics when/if I finish.

-Adam-

Sorry phuonguyen but i had a big look around and i coudnt find anything so i made one because i saw one on NH and i thought you guys would have lots of great ideas(and you do) p.s congrats on becoming a admin.

As for my modding idea i think people have thought of this before and done before, putting a longshot into a Ls similar to above but with a longshot im not totally sure if i would work.

piggy123:) wrote:

Titan with a air Commpression unit ( don't no what it's called also like the one sgnerf has on his magstrike) ar's removed and a hopper clip it would pwn.

Want to do this to my Mega Missile, already pumpmodded and it's AWSUM.

phuonguyen wrote:
PS. I'm halfway through that exact mod that you came up with... just without the hopper cause we don't have wyes in Australia. Plus I like the clips, so I'll try a clip system breech.

You don't need a wye to make a hopper clip. Just a tee and the regular piping. There's a tutorial on Oznerf itself. I've built one and it ROCKS. Feeds really reliably. Use PVC cement to glue the bits together and it'll be tough as guts.

TheDoubleBracket wrote:

piggy123:) wrote:

Titan with a air Commpression unit ( don't no what it's called also like the one sgnerf has on his magstrike) ar's removed and a hopper clip it would pwn.

Want to do this to my Mega Missile, already pumpmodded and it's AWSUM.

You don't need a wye to make a hopper clip. Just a tee and the regular piping. There's a tutorial on Oznerf itself. I've built one and it ROCKS. Feeds really reliably. Use PVC cement to glue the bits together and it'll be tough as guts.

You don't wanna chuck an aircomp onto a Mega Missile cause it has such a small volume of air. If you replace pump then you cut the number of pumps from 20 down to like 3.

Oh nah, I prefer clips, cause I use full 3" darts so a hopper or RSCB wouldn't be ideal for me.


An idea for the vulcan is joining 2 together, with the gun on the right firing half a cyle slower than the gun on the left. With both chains running down the middle. That means 5 darts a second = awesomeness!!

The thing is Servulus came up with the same idea...

Modding a Titan to fire mini- Vortexes.
Very, Very epic.

phuonguyen wrote:

TheDoubleBracket wrote:

piggy123:) wrote:

Titan with a air Commpression unit ( don't no what it's called also like the one sgnerf has on his magstrike) ar's removed and a hopper clip it would pwn.

Want to do this to my Mega Missile, already pumpmodded and it's AWSUM.

You don't need a wye to make a hopper clip. Just a tee and the regular piping. There's a tutorial on Oznerf itself. I've built one and it ROCKS. Feeds really reliably. Use PVC cement to glue the bits together and it'll be tough as guts.

You don't wanna chuck an aircomp onto a Mega Missile cause it has such a small volume of air. If you replace pump then you cut the number of pumps from 20 down to like 3.

Oh absolutely, but with a regulator - think about it - hopper clip plus air compressor on a MM - true semiauto. With insane power. I desperately want this.

I need to find a place that sells stuff like Directional Control Valves (other than McMaster Carr who don't sell here) so I can start thinking about doing a semiauto maverick.

bulletproofvest wrote:Modding a Titan to fire mini- Vortexes.
Very, Very epic.

All I can say.

It won't go far. For the reason that the air chamber is too small. Also would be dangerous...

For some reason you can throw a nerf dart 10metres... shoot an NF 10metres, and you will feel the NF more. Don't know why. Throwing a vortex is already good enough really.

littlebro05 wrote:

bulletproofvest wrote:Modding a Titan to fire mini- Vortexes.
Very, Very epic.

All I can say.

It won't go far. For the reason that the air chamber is too small. Also would be dangerous...

For some reason you can throw a nerf dart 10metres... shoot an NF 10metres, and you will feel the NF more. Don't know why. Throwing a vortex is already good enough really.

When we throw something like darts, vortexs or most round objects, we tend to add spin to them so that they rotate in the air, giving them a slight advantage. When we shoot them from our guns they dont spin, so they loose a little.

Rifling our barrels would work, said this before will say it now, it isnt to do with high velocity as some may think.

Would it be possible to modify a Titan to fire Scatter Blasts?
Of course, for the mod, you'd need:
A number of scatter blasts
A Titan you're willing to damage (probably)
Other various pipes, screwdrivers, saws, etc

Another possible mod could be to give, for example, a Longshot the Slam-fire ability exclusive to Raiders and AT's. This may need a Raider you're willing to sacrifice for its internals. Of course, there is no point if you don't like the slam-fire.

Anyone think these are any good ideas?

personally I think slam fire is awful. I removed the slam fire from my raider, having slamfire means the breech never closes fully before it fires. It's inaccurate and it also increase the likelihood of jams. And jams are something you really don't want in your longshot.
Also a lot of spring mods on the longshot make it quite hard to prime.

An under slung tac light for the maverick i have seen the mods for over barrel where you would have to pull on it to cock the gun i was thinkink unfer barrel because it would evan up the look and feel of the gun. Oh and BTW Hi y'all

A pull-back modded Lanard Shot Gun so you can have space for an intergration at the bottom!

A longshot with a Recon pistol (no attachments) integrated upside-down onto the place were the stand used to be. A large square hole would then have to be cut over the Recon, big enough for a clip to fit in it. The clip will have a piece of PVC, CPVC etc. sticking out the side, so to reload you just pull the clip up, and out.


- SuctionCup -

A nerf gun that takes Buzz Bee shells

SuctionCup wrote:A longshot with a Recon pistol (no attachments) integrated upside-down onto the place were the stand used to be. A large square hole would then have to be cut over the Recon, big enough for a clip to fit in it. The clip will have a piece of PVC, CPVC etc. sticking out the side, so to reload you just pull the clip up, and out.


- SuctionCup -

this is kindof what your talking about but this LS is singled and from what i can tell, you want the recon to become side loading and still keep the LS clipped?

You could just take of the black stock handle and trim the handle down a bit and whatnot and it should still work with both of them being bottom loaded.

Switchblade wrote:

SuctionCup wrote:A longshot with a Recon pistol (no attachments) integrated upside-down onto the place were the stand used to be. A large square hole would then have to be cut over the Recon, big enough for a clip to fit in it. The clip will have a piece of PVC, CPVC etc. sticking out the side, so to reload you just pull the clip up, and out.


- SuctionCup -

this is kindof what your talking about but this LS is singled and from what i can tell, you want the recon to become side loading and still keep the LS clipped?

You could just take of the black stock handle and trim the handle down a bit and whatnot and it should still work with both of them being bottom loaded.

That would work.



- SuctionCup -

matt.chopper wrote:A nerf gun that takes Buzz Bee shells

Noooooooooo.
no way.
Uh uh.
I hate shells on Buzz bee guns with a passion

They sound bad. Thanks now im not gonna waste my money!!!

Haha, Nah do what you want lol, I just find the shells annoying

I had a magstrike idea.. which i was planning to do but cbb hahaha..
But pretty much its a system involving less pumping time in the battle field. In order to do this you would need magstrike bladder parts.. broken guns would be my suggestion.. found a stack of them at kmarts.

but pretty much my idea was to cut off the bladder chambers and put some sort of bike pump attachments to connect them. so once the magstrike runs out of air just pop off the bladder and pop on a fully pumped one. I would probably suggest modding the bladder too for more air.