Post PICTURES of your modded, original works! (PICTURES ONLY! - NON-PICTURE POSTS WILL RESULT IN AN AUTOMATIC 7-DAY BAN!)

It looks OK, but I think you could do thee boltsled or something because it's yellow

I seem to be posting in this thread quite a lot nowadays, anyway...
I found this tube of metal when I was sifting through my dad's shed

It fits perfectly in Hep20 with a couple layers of E-tape. Plus these little rockets,arrows I have fit perfectly over it .

And in case your wondering the metal does not come out with the rocket/arrow.

Big Bad Bitch Bow. Complete with bolted in PVC/Recon stock.


That conduit barrel and a CDTD (a stefan made out of stock foam) I broke the dart shooting up the hotglue ripped off halfway and the weight went flying as well.

OMG WTF!!!!!




Why? Because I can.
Parts of the 'shell' had to be compromised.


Surprisingly good. Minimum estimated range is 90ft based off posts on Nerf Haven, maybe more due to my barrel setup, being 6 inches of PETG and 3.5 inches of brass. Works with white and blue foam. Hornet pump extrudes from grip, 6 pumps fills the tank nicely. Hotglue only used to secure tank. All other parts are held in place without solvent. Is also generally ridiculous.



May I also commemorate Brad on his raider, good stuff.

P.S. epic carpet

Modded and painted Element:

Other side:

I don't know why I decided to do two different sides...

My Nerf Guns

Hell Yeah!!

Snow Camo Mav.

The start of the family arsenal
Maverick: A/R removed, preloaded plunger spring, padded plunger, barrel drop mod. (mine)
Night Finder: Stock (Stacy's)
Ultra foam shot: Key ring pull plunger ( Amelia's)

My Recon i got 2 days ago.


Epic face.


Just finished this morning.


Has AR's out, And the shotgun loading thingy. The shotgun part is detachable so it can be just a bolt sled.(Literally, With Bolts!)

Ranges are about 70ft *MAX* and about 30-40ft at shoulder height with no angle.

Finally got "My.Sharona" all finished up (mostly)





Typical overhauled at2k, with 7 inch conduit barrels, and a kickin' paintjob. I did two layers of gray primer, a black base coat, 3 layers of Midnight Blue, a layer of spray-on silver glitter, and topped it off with a generous clearcoat. I also painted the fake air tank at the rear with metallic silver. I was also going to paint the pump cap, but I ran out of my silver paint. No biggie.

Ranges: A lot. With crappy darts, I can hit 80' easy. With fresh darts, its not uncommon to clear 100'. And I kept the turret, so RoF is good for an airgun. Once Informer gets his petg back in stock, this lady is getting herself a set of 12" barrels, and a barrel spacer.

my barricade

Finaly I have got some pictures of this project I was working on for quite some time,
I still haven't finished the painting( I need to put some orange parts on and some other things).
I just call it the Titan-strike for now because I have not thought of a cool enough name....yet.




As you can see it has a titan tank in it and the trigger is hooked up to the pin with a wire,
It has a 16mm coupler on it and I mainly use it with an rscb.

-Adam-

Ok so my last post got cut down from the ammount of photos and didnt let me show this one.

-Adam-

My completed collection of the clear series


Wall display


Box full of Nerf

My new toy


I call it the "Zombie Repellent"

Scored these for 20 bucks. If you look closely, one of them already has a brass barrel





Win.

First paintjob attempt!
Here is my "Forgotten Recon", with an antique/steampunk theme. It has the Nerf logos removed and a custom texture on the side panel, cocking slide and part of the stock. It was painted with black vinyl dye and copper paint, with an acid wash over the top to make the copper oxidise. Dry brushed with rust acrylic.
Since everyone hates Recons, I thought I would make it look like it was left outside and forgotten for a few years





It will probably pop up on eBay once I have checked how durable the copper paint is. Some of the shiny plastic doesnt hold it too well. *Next time I should sand it first...*

It's what you don't have.



Biggles

Yes, thats right. A breached Big Blast that accepts N-Strike clips. Ranges = heaps. Haven't plugged the pump yet, and I don't think I will. She is scary enough as it is.

Well, here's a dump of some photos!
Here's mah Recon, with a "custom" sight. Basically, I tore the ladder sight off of it's hinge and just used that. Aligns perfectly with the flip-up sight at the end of the barrel. It sort of reminds me of the sights an AK-47 has. And since the Recon is more of a combat rifle than a long-range one, much like the AK-47, I thought "Might as well keep with the idea!"

Fullview


Here's the barrel/sight.


First-person view! And I know it's upside-down, but I'm too lazy to edit it right and stuff.


Here's my Maverick and home-made foam combat knife (For those close encounters. Sucks I can't bring it to the Dec 5th war. Meh, fair's fair though.)


And here's a close-up on the knifeyknife!

My Couplered Shot Blast. I didn't have enough money to go buy some different coloured paint, so I just painted it snow camo again.

Sorry for the blurry picture. Fo some reason all this week my camera is not focusing

Here's my nite finder


its a shame since it shows a little ware and tare.

this isnt all of them

Put the unpainted lever next to the shotty to show a sort of before and after effect

The clip down near the shotty was painted in the same style for the lever action

That's right. I've got these. You don't. You may as well start running now.

As a side note, the at4k is HHHUUUUUUUUGGGGGEEEEE. It's a man-sized blaster, that's for sure!

[img][/img]

Here is my collection. Not pictured are 3 x Alpha Troopers (I have to hide them at work, my girlfriend will castrate me if she find out I bought 4 in 1 week)

My shot blast that actually uses a REAL trigger, unlike all the other shot blasts that have been made to use shitty little key rings. I did all the easy pre work (opening it up), phuonguyen did the hard arduous work of making the trigger for it.

10-12pumps - ranges of 100-110ft slightly angled using modified streamlines (just hot glue tips) and they go completely straight :D.... 90% of them anyway. Using a conduit 16mm barrel




Awesome trigger that makes it more ergonomic



I used a 16mm coupler as it fit almost perfectly on the section of the place where you can get it couplered. I will put on the orange flash hider when I can be bothered to do so.


Phuonguyen and I say "We're pretty sure our shot blast trigger is cooler than Chad's keyring nonsense,"

I got this little beauty today at a $2 shop. Comes with 4 darts and barely makes it 15 feet.



Still, for $2 I cant complain. My girlfriend is tho, I accidentally shot her in the head with it

My LS!
Additional features include 2nd tacticool rail, brass barrel, full AR removal, fully functional internally based fore-grip, custom Iron Sights, 70-80 ft ranges and semi steampunk inspired Black and Gold paintjob.

Secret Strike attachment gets 40-50 ft ranges and has barrel replacement sealed with hot glue. The end result is a snap-on integration system that gets similar ranges to a recon.



With Alpha Trooper drum in and SSPB Tacticool rail attachment.



With N-Strike clip



Aiming Down Sights



Additional tacticool rail.



Breech open showing brass barrel



SSPB attachment, write-up coming soon.



Wouldn't be complete without a FPS pic!

That's all for now.

PS Would this gun be allowed in a war with it's current paint-job?

Bacara wrote:
PS Would this gun be allowed in a war with it's current paint-job?

Probably not, considering it's black with very realistic iron sights.

danerfdude wrote:Probably not, considering it's black with very realistic iron sights.

danerfdude wrote:Where did you buy the vinyl dye from? I've been looking everywhere for it?

You posted 2 text posts in a pictures only thread, plus it was a double post....

Strike 2 and see you in 2 weeks.

Completed CS-MF LongStorm, demonstration of how strong that joint is by holding both guns by just the connected Barricade. It kicks so much ass.