Before I start, I'm going to annoy you all by giving you some background about how I came to this. I've seen heaps of people intergrate titans, mavericks, AT2k's, LSFGs and other guns under the LongShot. But I want a pump action LongShot and I can't have both, So I came up with this......
This is an Air Tech 2000 Intergrated into a LongShot scope attachment. It shoots 100ft and can be attached onto any N-Strike Rail without fail.
To make this, you will need.
-AT2K internals
-15mm coupler
-Barrel material of choice
-Form of wire
-Keyring or O-Ring
-E-Tape
-Screwdriver
-Dremel
First you'll need to get the A$$hole of a scope open.
To do this, I just cut down through the centre of one side but the other one came off with some effort of pull.
I kept in the goo-gage without the fluid because I'm really lazy. But to keep it, i had to cut through the shell here,
And here,
So that was the shell. Now for the internals.
All you have to do is epoxy a 15mm coupler on the front,
Attach the wire to the firing pin (I used the wire off my dad's whipper-snipper)
And if you want, Plug the Over pressure valve.
Now you have a beastly N-Strike attachment that goes over 100ft easily. You can put this on a NiteFinder or a Proton or a LongShot or any other gun with an N-Strike rail. I used a 5" 16mm Conduit barrel because I don't want any d*ck-waving on my attachments.
-Thank you guys,
James