Materials:
3: 15mm t joints
2: 15mm end caps
15mm PVC pipe
epoxy glue
cut a piece of the pipe long enough to fit into a t joint and into a coupler/over the barrel
put a t joint over the cut pipe
cut 2 more pieces of pipe long enough to connect 2 t joints together
put the cut pipe into the t joint then put the other t joints onto those
then cut 2 lengths of PVC pipe for the back of the clip the length depends on the amount of darts
put the end caps on them
then cut 2 pieces of PVC pipe for the barrel put the on the front
glue it all together then your done
***disclaimer***
This mod will only work if you have a powerful air blaster
Thanks to Kingcam for the drawing
3: 15mm t joints
2: 15mm end caps
15mm PVC pipe
epoxy glue
cut a piece of the pipe long enough to fit into a t joint and into a coupler/over the barrel
put a t joint over the cut pipe
cut 2 more pieces of pipe long enough to connect 2 t joints together
put the cut pipe into the t joint then put the other t joints onto those
then cut 2 lengths of PVC pipe for the back of the clip the length depends on the amount of darts
put the end caps on them
then cut 2 pieces of PVC pipe for the barrel put the on the front
glue it all together then your done
***disclaimer***
This mod will only work if you have a powerful air blaster
Thanks to Kingcam for the drawing
Last edited by sniperdude49 on Fri Jan 20, 2012 5:06 am; edited 4 times in total