In this Tutorial, I will show you how to add a strap to easily carry around your Big Salvo.
Materials/Tools
1. Screw Driver (Phillips Head)
2. Nylon Rope
3. Luggage Strap ($2 for $3.00 at the Warehouse)
4. Drill with appropriate drill bit (Preferably slightly bigger than your rope's diameter)
5. Knot tying skills.
Firstly I chose to drill the hole with the casing closed, this helped to get the hole in the same spot on both sides of the plastic. But you can do it with the case open as well.
Below is a picture of the internals, don't touch anything to do with the gun, there's no reason to do so.
Now drill your holes according, try to use the smallest drill bit available, or however big your rope is. Don't go and drill to bigger holes in the plastic as things might start breaking off, which would make your gun pretty ugly.
Next Run your rope through the holes and tie it together on the inside of the gun.
Close the gun back up and screw all the screws and attach your luggage strap to your new nylon rope attachment. Below is the finished product.
Enjoy.
Materials/Tools
1. Screw Driver (Phillips Head)
2. Nylon Rope
3. Luggage Strap ($2 for $3.00 at the Warehouse)
4. Drill with appropriate drill bit (Preferably slightly bigger than your rope's diameter)
5. Knot tying skills.
Firstly I chose to drill the hole with the casing closed, this helped to get the hole in the same spot on both sides of the plastic. But you can do it with the case open as well.
Below is a picture of the internals, don't touch anything to do with the gun, there's no reason to do so.
Now drill your holes according, try to use the smallest drill bit available, or however big your rope is. Don't go and drill to bigger holes in the plastic as things might start breaking off, which would make your gun pretty ugly.
Next Run your rope through the holes and tie it together on the inside of the gun.
Close the gun back up and screw all the screws and attach your luggage strap to your new nylon rope attachment. Below is the finished product.
Enjoy.