RSCB + Nite Finder.

Hey guys, I was looking at bringing in some wye's to make some hoppers but never got around to it so i decided to make a Rscb in its place.

Previous to adding the Rscb all the nite finder had done to it was an ar removal, a slightly stretched spring and i also added teflon tape under and behind the O-ring. I also removed the light and replaced it with a lazer i got from work.

The seal on this is pretty crazy, darts can be vacuum loaded and if i hold my hand over the coupler and fire the plunger sits at 3/4 of the way and dosnt move.

Edit: i have not measured ranges yet but i have not noticed a drop in ranges

It holds 4x1.5" darts or 9x3/4".





I used Araldite to glue half a 15mm pvc coupler onto the plunger tube.




I can use the barrel either by itself or on the Rscb.




I removed the original pcb with the light on it and cut the tube down so i could fit the lazer in.




I still have some work to do, remove some deadspace, pad the plunger head and some bodywork and a paint job.

Extremely nice mod, I shall add it to the Directory.

That is very nice indeed, any loss in range and accuracy? (one should read all befor posting)

Once i have re-plungered my NF i will give it a try.

I really like this mod, also I know i'm a noob but how exactly does an RSCB work?

xthepivotkidx wrote:I really like this mod, also I know i'm a noob but how exactly does an RSCB work?

You prime the gun and then tilt it forward, this allows a dart from the clip ( the big long thing at the back ) to fall forward into the barrel (the brass). When you fire the air goes through the elbow and the T and then propels only the dart at the barrel forward.

So, what size brass is the barrel and what is it nested inside? I'm guessing that you have used 15mm PVC for the clip.

hichrich wrote:
So, what size brass is the barrel and what is it nested inside? I'm guessing that you have used 15mm PVC for the clip.

All pvc pipe and fittings are 15mm, the brass is 19/32. I wrapped the brass with electrical tape and glued it in a short piece of pvc with Araldite.

Wow i mght do that to my night finder.

This thread is old. Please don't bump threads which are over 3months old.