inf0rm3r's Ordering System (Blue/Pink Foam, Silicone/Snap Tips, PETG, Springs, O-rings)

Rooksy I should get to it for you tomorrow.

The pre-order should be out by Sunday as everything delaying the process is now solved. I will basically PM YOU THE TOTAL I THEN NEED YOU TO FOLLOW THE INSTRUCTIONS CLEARLY so I can calculate the postage and invoice the items.

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150705517725

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150705514848&ssPageName=STRK:MESE:IT

If you are absolutely desperate you can get them from ebay from me direct if you don't mind a little increase in the price.

No idea baout when the v2 lite tips will be in?

hideNseek wrote:No idea baout when the v2 lite tips will be in?

inf0rm3r wrote:
Just an update for some other projects while I'm at it

GEN2 Lite has been handed to another Manufacture specializing in materials alternative to silicone which maintain softness and weight.

Blue Foam will be re-ordered shortly and stock levels should be maintained without a chance of no available stock over Christmas.

Pink foam after this batch will be made end of life and will be replaced with a specialist foam which I'll be adding more details to later.

This Info was copy from Australian Nerf as I don't recall seeing it posted here.

ORDERING SYSTEM IS DOWN FOR FURTHER NOTICE MINUS THE LISTED ITEMS

inf0rm3r wrote:CURRENTLY DOWN FOR MAJOR CHANGES.

Please check back later.

If you would like to purchase the following products only please e-mail sales@foam-sports.com

1. Photon Storm Blaster ($29.00) (Pre-order pricing is over)
2. Foam Magnum Pistols ($25.00) (Pre-order pricing is over)
3. Raging Fire Barricade with scope + Stock ($19.00) (Pre-order pricing is over)

1. Send an email to: sales@foam-sports.com
2. Set Subject line to: (username/real name - Order)
3. In your text section submit in exactly below format:

NAME: NAME REAL NAME
EMAIL: REAL ADDRESS
ADDRESS: FULL ADDRESS, POSTCODE, COUNTRY
ITEMS: IE PHOTON STORM $29.00

Be specific and include all costs.

The following products are not available until further notice:

1. Blue Foam (Discontinued)
2. Pink Foam (Discontinued)
3. Heavy Silicone Tip
4. Lite Silicone Tip (Discontinued)
5. Snap Caps
6. PETG

Once the order is submitted you will receive a confirmation within 72 hours of sending the e-mail. The invoice is sent with the order itself.

Are completed darts available?

What about k26 and the other springs?

I'd assume no as you haven't got them listed, but may as well ask

KingCam wrote:

hideNseek wrote:No idea baout when the v2 lite tips will be in?

inf0rm3r wrote:
Just an update for some other projects while I'm at it

GEN2 Lite has been handed to another Manufacture specializing in materials alternative to silicone which maintain softness and weight.

Blue Foam will be re-ordered shortly and stock levels should be maintained without a chance of no available stock over Christmas.

Pink foam after this batch will be made end of life and will be replaced with a specialist foam which I'll be adding more details to later.

This Info was copy from Australian Nerf as I don't recall seeing it posted here.

Thank you very much for the update!
My friend and I are looking forward to Gen2 Lite darts for out 9kg Stampedes

UPDATE: DARTS NOW AVAILABLE AGAIN

so I email with the instructions above to place an order, you reply and I pay on paypal? how much for 100 lite dart tips? will they fit in regular nerf darts btw? THanks very much.

Hey im waiting to do a fairly large order of blue foam, heavy and light tips and a longhshot spring, so let
me know as soon as these are all avaliable, i'd really love to be able to oreder them before christmas.
Thanks

When will all the items be back?

Items all back online except PETG which is due in shortly.

Some major changes are underway so please note this.

If you would like to purchase the following products only please e-mail sales@foam-sports.com

1. Photon Storm Blaster ($30.00) (Pre-order pricing is over)
2. Foam Magnum Pistols ($24.00) (Pre-order pricing is over)
3. Raging Fire Barricade with scope + Stock ($19.00) (Pre-order pricing is over)
4. 100PK Stinger Darts ($20.00)
5. 100PK Heavy 0.50CaL Darts ($20.00)
6. 100PK Heavy Tips ($7.50)
7. 100PK Lite Tips ($7.50) (Generation 1, Requires Plastics Glue to adhere to Silicone, some super glues may work, Generation 2 Solves this)
8. 1M/3.28FT (Pre-cut 6.4CM) Blue Foam (0.75c P/M)
9. 1M/3.28FT (Pre-cut 6.4CM) Pink Foam (0.35c P/M) (Note current batch has variable diameter some about 15% to large for stock blasters this is why it is so cheap)

COMING SOON (January/February/March OR LATER)

1. Generation 2: Blue Foam (February)
2. Generation 2: Lite Tips Blue, Red, Yellow, Purple, Black (March)
3. Heavy Tips: Blue, Red, Yellow, Purple, Black (February)
4. Generation 2: Green + Purple Foam (April)
5. PETG (New Stock February)


1. Send an email to: sales@foam-sports.com
2. Set Subject line to: (username/real name - Order)
3. In your text section submit in exactly below format:

NAME: NAME REAL NAME
EMAIL: REAL ADDRESS
ADDRESS: FULL ADDRESS, POSTCODE, COUNTRY
ITEMS: IE PHOTON STORM $29.00

Be specific and include all costs.

If you are an international customer please email and request a US or Singapore Price list as it is discounted to absorb some shipping costs.

Once the order is submitted you will receive a confirmation within 72 hours of sending the e-mail. The invoice is sent with the order itself.

inform3r,

Any difference between the existing blue foam and the Generation 2 blue foam? Also is heavy tip is the same material like before?

Hey Alex

Blue foam may have a slight diameter change but this is just to make the fit better in PETG and brass, it's only 0.1MM. Maybe some hardness difference to improve durability further.

Heavy tips will remain the same.

hey man,
do you think i will be able to get 15m of pink foam and 15m of blue foam shipped to 2074 NSW
Please give me a total price including shipping
also does your blue foam have a tight fit with your PETG?

inf0rm3r wrote:Items all back online except PETG which is due in shortly.

If you would like to purchase the following products only please e-mail sales@foam-sports.com

1. Photon Storm Blaster ($30.00) (Pre-order pricing is over)
2. Foam Magnum Pistols ($24.00) (Pre-order pricing is over)
3. Raging Fire Barricade with scope + Stock ($19.00) (Pre-order pricing is over)
4. 100PK Stinger Darts ($20.00)
5. 100PK Heavy 0.50CaL Darts ($20.00)
6. 100PK Heavy Tips ($7.50)
7. 100PK Lite Tips ($7.50) (Generation 1, Requires Plastics Glue to adhere to Silicone, some super glues may work, Generation 2 Solves this)
8. 1M/3.28FT (Pre-cut 6.4CM) Blue Foam (0.75c P/M)
9. 1M/3.28FT (Pre-cut 6.4CM) Pink Foam (0.35c P/M) (Note current batch has variable diameter some about 15% to large for stock blasters this is why it is so cheap)

1. Send an email to: sales@foam-sports.com
2. Set Subject line to: (username/real name - Order)
3. In your text section submit in exactly below format:

NAME: NAME REAL NAME
EMAIL: REAL ADDRESS
ADDRESS: FULL ADDRESS, POSTCODE, COUNTRY
ITEMS: IE PHOTON STORM $29.00

Be specific and include all costs.

Once the order is submitted you will receive a confirmation within 72 hours of sending the e-mail. The invoice is sent with the order itself.

ADGJnerfer wrote:hey man,
do you think i will be able to get 15m of pink foam and 15m of blue foam shipped to 2074 NSW
Please give me a total price including shipping
also does your blue foam have a tight fit with your PETG?

@Adgjnerfer Please send your Order Inf0rm3r Email Address to get the Total and a Shipping Quote.

I told everyone this would be a big year. All this stock is due before March 1.

1. Heavy Tips Gen 2 Black (HTBLA)
2. Heavy Tips Gen 2 Blue (HTBLU)
3. Heavy Tips Gen 2 Red (HTRED)
4. Heavy Tips Gen 2 Yellow (HTYEL)
5. Heavy Tips Gen 2 Orange (HTORA)
6. Heavy Tips Gen 2 Pink (HTPIN)
7. Heavy Tips Gen 2 Purple (HTPUR)
8. Heavy Tips Gen 2 White (HTWHI)

1. Velocity Performance Black (Lite Tip Gen 2)
2. Velocity Performance Blue (VPTBLU)
3. Velocity Performance Red (VPTRED)
4. Velocity Performance Yellow (VPTYEL)
5. Velocity Performance Orange (VPTORA)
6. Velocity Performance Pink (VPTPIN)
7. Velocity Performance Purple (VPTPURP)
8. Velocity Performance White (VPTWHI)

NEW FOAMS Generation Two Stock (DUE MARCH)

1. Velocity Foam Electric Blue (VFBLU1M)
2. Velocity Foam Neon Green (VFGRE1M)
3. Velocity Foam Violent Purple (VFPUR1M)
4. Velocity Foam Glow White (VFGWHI1M)
5. Velocity Foam Shadow Black (VFBLA1M)
6. Velocity Foam Sun Yellow (VFYEL1M)

Hey how much 13mm FBR can I buy from you with $15?

Nitefinder49 wrote:Hey how much 13mm FBR can I buy from you with $15?

inf0rm3r sells custom tube foam, not FBR...

And, really, it shouldn't be that difficult to divide the price per metre in to $15...

Cheers,

Is the custom tube suitable for dart making? And which one can fit modified nerf guns? How much would postage be to 2120? $6.60?

Nitefinder49 wrote:Is the custom tube suitable for dart making? And which one can fit modified nerf guns? How much would postage be to 2120? $6.60?

Yes, they are quite suitable for dart making, hence why he is the most popular source of dart materials in Australia.

Nitefinder49 wrote:Is the custom tube suitable for dart making? And which one can fit modified nerf guns? How much would postage be to 2120? $6.60?

Read the thread and look at the pictures it's not hard to see what exactly it does.

It's pre-cut purpose made dart materials, If you mention FBR in my thread again I will burn you.

Are you trying to threaten me?

Nitefinder49 wrote:Are you trying to threaten me?

No, he's trying to get you to use some initiative and common sense to read before you post.

Well I'm sorry if I offended him but I was only inquiring and I didn't know that what he supplied was different.

I think you annoyed him more than offending him. For future reference, foam backing rod (fbr) is purchased from places like Clark Rubber. They are solid lengths (not hollow) of foam cylinder which people use for stefans. Informer sells blue foam, which is pre-cut foam and is very similar to stock nerf dart foam but is much more dense and thus better quality.

edit: to clarify, his blue foam is for making stingers (blue foam + stinger darts).

Nitefinder49 wrote:Are you trying to threaten me?

Whilst I'm positive that inf0rm3r isn't threatening you, I can start if you like.
Consider this your only warning....

ApoKalyptiK x wrote:

edit: to clarify, his blue foam is for making stingers (blue foam + stinger darts).

Very close to the money mate. The blue foam is exceptional for making darts, but the focus is being shifted towards using heavy and lite sili tipped darts for safety. Hence why FSA is releasing multiple colours of foam, heavy tipped sili's and the new Gen2 lite sili's.
Stinger's still pwn though!! haha)

Cheers,

Can this blue dart material be used to make stefans? And is it cut in a whole big length or short increments?

Has everything everyone has said above gone right over your head? It has been said that yes, the foam can be made into stefans. It is pre cut to streamline size.

Hi Informer, I would have PMd you but I don't have the privileges yet.
I want some accurate darts for a massacre kitted recon, I still want to be able to shoot people without hurting them though (so Im thinking not stingers), are you going to be selling soft light tipped darts or do I have to buy your blanks and tips?

You can use heavy tips, these are silicone rubber, harder than streamlines obviously but not as hard as snap caps.

If you want really soft performance tips you'll have to wait until the new range of velocity tips coming in February-March.

Does your foam fit in cpvc?

hi inf0rm3r,

I sent you an email to you regarding some stuff i wanted to buy.
Which was at the start of the week i think.
I was wondering if you got the email?
If not let me know and I will re-send it.

Thanks.

Nsnerfing wrote:Does your foam fit in cpvc?

Depends on the size CPVC. The foam is 12.7mm~ish in diameter. (pretty much the same as stock darts)

is it possible to buy, say 10 of each dart to try them out?