Raider Troubles "sigh"

So i took the ar out of my raider, but before i tested it i put about 3mm of adhesive foam on the back of the plunger so it would not damage the internals.
It shoots about 26 feet, help me

Get rid of the foam plus are you using stefans? Also you should learn to fix problems. When I modded my raider, I accidentally cut a 3cm gash in the plunger tube, but I dealt with it and fixed it. *hint hint*

Yer i no, i was just gunna take it out but i thought that someone might have had the problem.
and no im not using stefans.
What ranges are u getting with just the ar removed and the hole in the launch tube plugged

Edit: found out the problem, my dad ( who decide to help for the first time) sprayed silicone spray onto the o ring :S
So yer now i gotta find a new one

jacko1120 wrote:
Edit: found out the problem, my dad ( who decide to help for the first time) sprayed silicone spray onto the o ring :S
So yer now i gotta find a new one

Wait, Silicone spray wrecked the o-ring or did you use WD-40?

It was a silicone based lubricant.
It made to o ring expand and become useless

Silicone based lube is fine for nerf guns. I use it all the time, on all my guns, longshots, recons, mavs, nightfinders, everything.

You might find that when you put the two plunger parts back together that the o-ring was streched. This has happened to me before, and it stuffed my recon.

K might be that then, now all i gotta do is buy another o-ring.

Not all Silicon sprays are compatable with rubber. Some can have addatives which will hurt the O rings.

If you can't find a O ring, you could get the recon O ring from Here

Ok, thanks roger.
Oh and a range update,

1 FOOT !!!!!!!! lol


Edit: $7 shipping for a $1.60 o-ring, i think ill pass for now