What we have here is a 3 barrel attchemnt for 15mm couplers.
You will need:
6 inches of barrel material (I'm using Hep2o)
a 25mm to 15mm reducing coupler
foam backer road (any size or quality)
3 cm of 15mm PVC
Take your barrel material and cut it down to 2 inch lenghts.
And stick them in the reducing coupler. Hep20 fits quite well in here, but I don't know about other things. Hep20 has an outside diamiater of 16mm.
Now fill the big gaps with Foam.
then fill the gaps with hot glue, making sure its all air tight.
glue 3cm of 15mm pvc into the back of the reducing coupler. This end attachess to your gun.
And there you are.
I can get this ting to fire 3 of my converted darts about 60 feet using my big blast. I've also used this at the last Adelaide war, to decent effect. Its good for hitting pesky targets, except fo Tidge, who can contort his body around all 3 darts.
You will need:
6 inches of barrel material (I'm using Hep2o)
a 25mm to 15mm reducing coupler
foam backer road (any size or quality)
3 cm of 15mm PVC
Take your barrel material and cut it down to 2 inch lenghts.
And stick them in the reducing coupler. Hep20 fits quite well in here, but I don't know about other things. Hep20 has an outside diamiater of 16mm.
Now fill the big gaps with Foam.
then fill the gaps with hot glue, making sure its all air tight.
glue 3cm of 15mm pvc into the back of the reducing coupler. This end attachess to your gun.
And there you are.
I can get this ting to fire 3 of my converted darts about 60 feet using my big blast. I've also used this at the last Adelaide war, to decent effect. Its good for hitting pesky targets, except fo Tidge, who can contort his body around all 3 darts.