Massive Recon Issue

hello people
Today the back of my plunger tube just broke off is there anything i can do to fix? it maybe a 10cent coin?
if i cant fix it is there anyway i can still use the recon
cheers
p.s i really need help we have a recon & nitefinder nite war coming up

GOD!! Capitals man!

-Back on Topic-

You could Super glue it back on the hot glue the E-tape, but that would make it alot weaker(structually wise)but usable.

-Flyjammer

1.Woops.
2.I have an idea about cuting a buzzbee shell and using it as the rest of the plunger tube.
i will post pictures as a tutorial maybe.
Cheers

Ghost wrote:1.Woops.
2.I have an idea about cuting a buzzbee shell and using it as the rest of the plunger tube.
i will post pictures as a tutorial maybe.
Cheers

You had the idea? Or you saw it on another forum/website, big difference. If you can pull it off it will work fine.

Told ya your plunger would break.

-Hamish

Some people broke my recon plunger and one of them payed for another whole recon, I tried araldite on the plunger after three shots it broke again

Seems to me they aren't worth fixing. Terrible design just buy a big blast.

Rees85 wrote:Seems to me they aren't worth fixing. Terrible design just buy a big blast.

Except you can't find BBBB anywhere

Ghost wrote:hello people
Today the back of my plunger tube just broke off is there anything i can do to fix? it maybe a 10cent coin?
if i cant fix it is there anyway i can still use the recon
cheers
p.s i really need help we have a recon & nitefinder nite war coming up

I wouldn't bother to fix it. Piece of junk. If you really want a Recon just buy a new one at Big W for $30.

There is no fix. try Zinv for an Alu plunger maybe, but that will cost more than another recon

Aj

CobraNerf wrote:

Rees85 wrote:Seems to me they aren't worth fixing. Terrible design just buy a big blast.

Except you can't find BBBB anywhere

Look in the trading I'm auctioning 2.

As for the recon tube, it breaks easily, its a weak and piss poor design so you can expect this. You can either as AJ said buy an aluminum plunger which costs as much as a gun or buy a new gun and gently put some epoxy inside the plunger where the break occurs on the new gun, I found if done right and set to dry properly it prevents it from breaking for a longer period of time, no guarantee on forever though.

If you really want to fix the blaster,i have a tube and plunger in good condition. Might i suggest putting some cushioning in it etc first though ?

Big Blasts can be found, someone usually has a supply every now and then, not for long though. This has happened to alot of people, I got an Aluminium plunger to stop this. It doesn't fire as well anymore but I could always sell it when I no longer want to use my Recon.