Credit to TryHardGamer47 for the hole coupler idea
Sorry for the quality of the photos
Your going to need:
e-tape
Lanard Triple shot
Random plastic
and this thing:
First your going to open up the triple shot:
Take this out Ignore the putty:
Now grab some wire cutters and cut the red lines yuou jusr making room for the coupeler:
Now remove the little spring on the trigger catch and fill it with hot glue:
Then the other side:
Now re-enforce the shell with some epoxy putty on both sides like so:
now get the coupler from the splat blast and put it on the end of the plunger tube if it falls off turn it around and put it on:
now wrap some petg in e-tape so it fits tightly inside the coupler:
Now if your trigger catch is broken heres how to fix it:
Cut a 2cm random piece of plastic off something:
then place it on the cracked part and tightly wrap it in e-tape:
Now for the illusive 9th click:
Now I was too lazy to get out my dremmel since it is air compressed and all so I just used this:
Now your gonna want to dremmel (or cut) back here(Remember to do this to both sides):
then dremmel or cut this post (Remember to do this to both sides):
(Remember to do this to both sides)Make a slide extension and shape it with the slide (this is optional if your singling it or not):
And cut down this post:
Now go to the handle and cut all this out of the rear side of it:
If youve done it correctly you should get the 9th click!
Then put it all back together then your done:
Sorry for the quality of the photos
Your going to need:
e-tape
Lanard Triple shot
Random plastic
and this thing:
First your going to open up the triple shot:
Take this out Ignore the putty:
Now grab some wire cutters and cut the red lines yuou jusr making room for the coupeler:
Now remove the little spring on the trigger catch and fill it with hot glue:
Then the other side:
Now re-enforce the shell with some epoxy putty on both sides like so:
now get the coupler from the splat blast and put it on the end of the plunger tube if it falls off turn it around and put it on:
now wrap some petg in e-tape so it fits tightly inside the coupler:
Now if your trigger catch is broken heres how to fix it:
Cut a 2cm random piece of plastic off something:
then place it on the cracked part and tightly wrap it in e-tape:
Now for the illusive 9th click:
Now I was too lazy to get out my dremmel since it is air compressed and all so I just used this:
Now your gonna want to dremmel (or cut) back here(Remember to do this to both sides):
then dremmel or cut this post (Remember to do this to both sides):
(Remember to do this to both sides)Make a slide extension and shape it with the slide (this is optional if your singling it or not):
And cut down this post:
Now go to the handle and cut all this out of the rear side of it:
If youve done it correctly you should get the 9th click!
Then put it all back together then your done:
Last edited by sniperdude49 on Thu Mar 15, 2012 12:08 pm; edited 2 times in total