The Tek Turret - 4 Shot Turret For Airguns

Since shitall has been going on around here, I thought I would post this:



I call it the tek turret. Why? Because it was created using the turrets of one of the shitty Twin Packs of Tek 4's. It is designed to fit in 15mm couplers (the plunger tube of a tek 4 has the same OD unbelievably) They are relativly simple to make as well. Getting the seal is the hard part as it is rear loading.



First cut the barrels of both the turrets. Cut you barrel materials to your desired length. Glue it on and then slide the other turret base on as a stablizer. The seal was made using rubber washers I bought from Bunnings in this massive pack of O-rings etc. The end of the plunger tube has a stock sealing rubber thing. Dremel it completly out for nice direct airflow. Now your done. Whack it on your BBBB or whatever else you use and you should be a force to be reckoned with

Finaly doing something usefull with a tec 4. How good is the seal? any range loss compared to singling. Also, does the turret click into place or do you have to allign it yourself.

Pretty sure the larger orange part at the bottom locks the barrel into place

Nice work on the turret, as roger said glad they can be used for something

Aj

Thanks guys. Yes the part down the bottom locks it in place, the pieces just had to be glued together otherwise they would just spring out. The seal is not 100% but pretty close to it, maybe a 10-15ft range drop overall.